Abstract:In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage; the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.

Thermal difference characteristic analysis of a flat steel box girder in long-span suspension bridge based on long-term field measurement data

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Thermal field characteristic analysis of steel box girder based on long-term measurement data

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Temperature Distribution on Flat Steel Box Girders of Runyang Bridges Based on Long-term Measurement Data

Long-term Monitoring and Statistical Analysis of Temperature Field of Flat Steel-box Girder of Sutong Bridge

Life-cycle simulation method of temperature field of steel box girder for Runyang cable-stayed bridge based on field monitoring data

Estimating Extreme Temperature Differences in Steel Box Girder Using Long-Term Measurement Data

Thermal performance analysis of a long-span suspension bridge with long-term monitoring data

CHARACTERISTICS OF TRANSVERSE TEMPERATURE DIFFERENCES OF STEEL BOX GIRDER IN RUNYANG CABLE-STAYED BRIDGE USING LONG-TERM MONITORING

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Temperature Distribution Analysis of Steel Box-Girder Based on Long-Term Monitoring Data

Temperature Gradient and Its Effect on Flat Steel Box Girder of Long-Span Suspension Bridge

Long-term temperature field of steel-box girder of a long-span bridge: Measurement and simulation

Experimental Study of Thermal Effects on A Long-Span Suspension Bridge

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Simulation of stochastic temperature field for Runyang suspension bridge life-cycle evaluation based on monitoring data

Investigation of Temperature Actions on Flat Steel Box Girders of Long-Span Bridges with Temperature Monitoring Data

Long-term temperature monitoring and analysis of steel box girders of Pearl River Huangpu Bridge

Temperature gradient of flat steel box girder in suspension bridge

Temperature Effect of Railway PC Part Cable-stayed Bridge Based on Long-term Monitoring