Abstract:Abstract Background: Recording of electrical activity of neurons is indispensable for decoding the information in the brain. The amplitude of signals recorded by electrodes is small, and it must be amplified to the level that can be digitalized by the analog-to-digital convert (ADC). A micro-power low-noise neural recording amplifier is indispensable for implant hippocampal cognitive prosthesis. When the process turns into deep submicron, the gate leakage current of the metal oxide semiconductor (MOS) transistor becomes larger and mismatch between devices becomes worsen. It is necessary to keep the neural amplifier robust in all process corners. Methods: The proposed circuit is a two-stage amplifier which can achieve a good trade-off between power consumption and noise. Four second-stage amplifiers share a common reference amplifier to reduce area and power consumption. A pseudo-resistor with high resistance is utilized to realize a very-low frequency high pass corner without external components. In order to minimize process variation, a bulk-compensated (BC) technique is adopted to maintain adequate tolerance in all corner case. Results: The 4-channel neural amplifier is designed and fabricated in a 40 nm standard complementary metal oxide semiconductor (CMOS) process. It achieves a mid-band gain of 54 dB, a bandwidth of 70 Hz to 7.7 kHz, a total input-referred noise of 3.2 μVrms , and a Noise Efficiency Factor (NEF) of 3.3 while consuming 4.68 µW from the 1.1 V supply. The core area of one channel is only 0.032 mm 2 . Conclusion: A 4-channel integrated neural recording amplifier chip with bias-compensated circuits is presented in this paper. Extensive simulations insure that the design is “center”. The chip layout is verified using design rules check (DRC) and layout versus schematic (LVS) design check with the help of verification tools. Test results shows that it is less sensitive to process variation and consumes less power compared with amplifier without bulk-compensated circuit. This makes the design robust and uniquely appropriate for low-power implant application.

Design of Cochlear Implant Stimulating Circuit

Design of cochlear implant

Design of a Hippocampal Cognitive Prosthesis Chip

A neuro-stimulus chip with telemetry unit for cochlear implant

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

A 0.042 mm^2 programmable biphasic stimulator for cochlear implants suitable for a large number of channels

A Wideband Wireless Microstimulating Aisc For Cochlear Implant

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A Wirelessly Programmable Chip for Multi-Channel Neural Stimulation

Power Issues on Circuit Design for Cochlear Implants

A Multi-Mode And Multi-Channel Cochlear Implant

Design and implementation of a DSP with multi-level low power strategies for cochlear implants

An application-specific low power speech processor for cochlear implants

Design and implementation of cochlear implants′ speech signal processing system based on CIS algorithm

A Circuit System Design for Implantable Multi-channel neural stimulator

A design of speech signal processor for cochlear implants based on DSP

INTRACOCHLEAR ELECTRIC AND ACOUSTIC STIMULATOR PROTOTYPE: AN IMPLANTABLE SOLUTION TO THE HYBRID COCHLEAR IMPLANT

Low-power IC Design for a Wireless BCI System.

A High-Voltage, Energy-Efficient, 4-Electrode Output Stage for Implantable Neural Stimulator

Design Of A Compact Wireless Multi-Channel High Area-Efficient Stimulator With Arbitrary Channel Configuration

A low-power, 16-channel implantable neurostimulator