Abstract:H2 production can be used as a clean and renewable energy source for various applications, including fuel cells, internal combustion engines, and chemical production. Using nickel-based catalysts for steam reforming biomass tar presents challenges related to catalyst deactivation, poisoning, heterogeneous composition, high process temperatures, and gas impurities. To overcome these challenges, adopting a nickel-based catalyst with selected oxide support and MgO and CaO promoter is a promising approach for improving the efficiency and sustainability of steam reforming for hydrogen production. The majority of studies conducted to date have focused on the steam reforming of particular tar compounds, most commonly benzene, phenol, toluene, or naphthalene, over a range of support catalysts. However, the actual biomass tar composition is complex, and each component impacts how well steam reforming works. In this research, a multi-compound biomass tar model including phenol, toluene, naphthalene, and pyrene underwent a steam reforming process. Various types with 10 wt.% of nickel-based catalysts were generated by the co-impregnation technique, which included 90 wt.% different oxide supports (Al2O3, La2O3, and ZrO2) and 10 wt.% of combination alkaline oxide earth promoters (MgO and CaO). Thermogravimetric analysis, Brunauer–Emmett–Teller (BET) method, N2 physisorption, temperature-programmed reduction (H2-TPR), temperature-programmed desorption (CO2-TPD), and X-ray diffraction (XRD) of ni-based catalyst characterized physiochemical properties of the prepared catalyst. The reaction temperature used for steam reforming was 800 °C, an S/C ratio of 1, and a GHSV of 13,500 h−1. Ni/La2O3/MgO/CaO (NiLaMgCa) produced the most carbon to-gas conversion (86.27 mol%) and H2 yield (51.58 mol%) after 5 h of reaction compared to other catalysts tested in this study. Additionally, the filamentous carbon coke deposited on the spent catalyst of NiLaMgCa does not impact the catalyst activity. NiLaMgCa was the best catalyst compared to other catalysts investigated, exhibiting a stable and high catalytic performance in the steam reforming of gasified biomass tar. In conclusion, this study presents a novel approach by adding a combination of MgO and CaO promoters to a ni-based catalyst with various oxide supports, strengthening the metal-support interaction and improving the acid-base balance of the catalyst surface. The mesoporous structure and active phase (metallic Ni) were successfully developed. This can lead to an increase in the conversion of tar to H2 yield gas and a decrease in the production of undesired byproducts, such as CH4 and CO.

Catalytic Conversion of 1-Methylnaphthalene As Tar Model Compound from Hot Coke Oven Gas over Ni/Mgo/Al2o3 Catalysts

Catalytic Conversion of Tar from Hot Coke Oven Gas Using 1-Methylnaphthalene As a Tar Model Compound

The study of catalytic reforming of coke oven gas producing hydrogen-rich gas

Seeded-growth Preparation of High-Performance Ni/MgAl2O4 Catalysts for Tar Steam Reforming

Optimal Fe/Ni/ Ca‐Al catalyst for tar model steam reforming by using the Taguchi method

In-situ Catalytic Upgrading of Coal Pyrolysis Tar Coupled with CO2 Reforming of Methane over Ni-based Catalysts

Catalytic Cracking Conversion of Tar Component in High Temperature Coal Gas

Experimental study of Ni/MgO catalyst in carbon dioxide reforming of toluene, a model compound of tar from biomass gasification

Characteristics of tar formation during catalytic reforming of pyrolysis volatile from pine saw dust over novel Ni-based magnesium slag catalyst

High Catalytic Performance of an Innovative Ni/magnesium Slag Catalyst for the Syngas Production and Tar Removal from Biomass Pyrolysis

In‐Situ Upgrading of Coal Pyrolysis Tar with Steam Catalytic Cracking over Ni/Al 2 O 3 Catalysts

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Effect of Ni/Mo on the preparation of non-loaded NiMoSx catalysts and the hydrogenation performance of coal tar

Steam Reforming of Α-Methylnaphthalene As a Model Compound of Biomass Tar over Ni-based Catalyst for Hydrogen-Rich Gas

The Efficiency of Carbon Conversion and Hydrogen Production from Tar Steam Reforming of Biomass Using Ni-Based Catalysts with Alkaline Earth Promoters

Catalytic Cracking of Biomass Tar Using Ni Nanoparticles Embedded Carbon Nanofiber/porous Carbon Catalysts

Boosting syngas production from corncob tar reforming over Ni/MgAl hydrotalcite-derived catalysts

Catalytic Pyrolysis of Naomaohu Coal Using Combined CaO and Ni/Olivine Catalysts for Simultaneously Improving the Tar and Gas Quality

Hydrogenation of coal tar on NiMoP/γ-Al2 O3 catalyst

Catalytic Cracking of Biomass Tar over Char Supported Nickel Catalyst