Abstract:Continuous damage accumulation resulting from void nucleation, growth, and coalescence leads to the final ductile fracture. The Gurson–Tvergaard–Needleman (GTN) model and its extensions, which model these mechanisms, are famous coupled constitutive models for predicting material failure. In this study, the GTN model was extended by incorporating two different damage variables: void volume fraction and shear damage; this was done to describe damage accumulation and ductile fracture under a wide range of stress states from compression-dominated to tension-dominated ones. The shear damage was composed of the shear void nucleation related to secondary voids and shear deformation damage. In addition, the shear void nucleation and void closure effect resulting from compression deformation were introduced to model the change in void volume under different loading conditions. The Lode angle dependence function was updated to express the various stress states and competition mechanism between two damage variables. Furthermore, the effective damage and its incremental form was used to define the extent of damage accumulation and fracture initiation. Subsequently, the proposed model was implemented in finite element software through user subroutines, and three distinct experiments related to high, low, and negative stress triaxiality were performed to calibrate the model parameters by the inverse analysis method for 1045 steel and 2024-T351 aluminum alloy. The experimental results under proportional and path-changing loading conditions were used to analyze the damage evolution and validate the proposed model. The good agreement between the numerical prediction and experimental results for the displacement and location at fracture, indicates good predictive ability of formulated model under arbitrary loading conditions.

Finite Element Analysis of Tensile Behavior of Ductile Steel with Defects

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Ductile tearing analyses of cracked TP304 pipes using the multiaxial fracture strain energy model and the Gurson–Tvergaard–Needleman model

DUCTILE DAMAGE ANALYSIS FOR FRACTURE IN SHEET METAL FORMING BASED ON GTN MESOSCOPIC DAMAGE MODEL

Uniaxial Tensile Performance in the Presence of a Defect: Prediction Through a Defect-Tolerant Design Framework

Experimental and Numerical Study of Progressive Failure of Ductile Metals

A STUDY ON EXPERIMENTS AND SIMULATIONS FOR DUCTILE FRACTURE OF ISOTROPIC MATERIAL USING ROUSSELIER'S DAMAGE MODEL

Analysis of Metallic Ductile Fracture by extended Gurson models

Simulation of Ductile Fracture in an Aluminum Alloy Using Various Criteria

Anisotropic Gurson-Tvergaard-Needleman model considering the anisotropic void behaviors

Extended GTN Model for Predicting Ductile Fracture under a Broad Range of Stress States

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

Ductile Damage Analysis for Small Punch Specimens of Type 304 Stainless Steel Based on GTN Model

Experimental and Numerical Investigation of Failure Mode in Geometrically Imperfect DP590 Steel

Meso-mechanical Analysis of Fracture Process of Anisotropic Ductile Damage in Hot-Rolled Steel

Investigating Ductile Failure At The Microscale In Engineering Steels: A Micromechanical Finite Element Model

Model for predicting ductile fracture of SA508-3 steel undergoing hot forming

Anisotropic Ductile Fracture: Experiments, Modeling, and Numerical Simulations

Comparison of FE Simulation and Experiment on Tensile Test of TWB-HPF 22MnB5 Steel

Material Parameters in the GTN Model for Ductile Fracture Simulation of G20Mn5QT Cast Steels