Temperature Detection in Generator Protecting System

Qian Hao,ZHAO Rong-xiang

DOI: https://doi.org/10.3969/j.issn.1003-188x.2005.06.056

2005-01-01

Abstract:This paper states temperature detection in a generator protecting system, and it also gives the design of hardware and software. The hardware part discusses the design of each circuit, while the software part introduces the design of the major part. The use of this system has achieved a good goal.

What problem does this paper attempt to address?

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Guanhua Xu,Wen He,Runjie Shen

DOI: https://doi.org/10.4028/www.scientific.net/amm.157-158.127

2012-01-01

Applied Mechanics and Materials

Abstract:A novel design of a temperature test chamber in multi-parameter combined environmental test was introduced, in which thermoelectric coolers were adopted to achieve both high and low temperature. Multiple distributed actuators and temperature sensors were used for improving the evenness of the temperature field. A well performed cooling system for waste heat dissipating was designed based on air-cooled radiator and circulating water flow. A temperature control system based on PC and MCU with wireless communication modules was designed. The thermoelectric cooler was driving by H-bridge circuit, whose power was controlled by PWM signal. PID algorithm was applied and average temperature was adopted to be the controlled variable. Measurement and control software on the PC and MCU was analyzed and its flow diagram was given. Influenced by centrifugal acceleration, unevenness of the temperature field would increase. A fan was mounted at the bottom of the chamber to improve the evenness of the temperature field. The experiment results show that the temperature environment with other combined environment is realized in the test chamber based on the above technology.
Design and Realization of Temperature Limiter Measurement and Control System

王恒奎,潘峰,边耐欣,陈子辰

DOI: https://doi.org/10.3969/j.issn.1000-8829.2001.05.011

2001-01-01

Abstract:The development of measurement & control system under Windows is introduced,and the system's function,design of hardware and software are discussed in detail .At the end of this paper, we think it has a wide application prospect in industry.
Condition Monitoring System of Simulator Test Rig for Shield Tunnelling Machine

Guoliang Hu,Guofang Gong,Huayong Yang

DOI: https://doi.org/10.3969/j.issn.1000-1298.2007.01.042

2007-01-01

Abstract:Aiming at the questions existed in the simulating test of shield tunnelling machine, a condition monitoring system of simulator test rig for shield tunnelling machine was designed using common configuration software “Kingview”, and the structure characteristics of hardware and software were also analyzed. The human machine interface of condition monitoring system was developed and designed, and the design idea was also expounded in detail. The experimental results show that the designed condition monitoring system has good operation performance and high security, which has been applied in the simulator tunnelling successfully.
[Temperature Measuring and Heating Controlling in Transurethral Prostate Thermotherapy System].

L Luo,Q Wang,Y Chen,X Yu

1997-01-01

Abstract:This paper introduces the system construction of Transurethral Prostate Thermotherapy Device. The temperature measuring device, I/O interface circuit and the programming principle of PID controlling system is illustrated also.
Detection and Control of Regenerative High Temperature Pressured Steam Generator

GAO Ning-bo,LI Ai-min

2008-01-01

Abstract:Mainly introduced the operational principle of the high temperature pressured steam detecting generator.Based on the features and control requirements,the running and controlling programme were stated.The detecting of cold and hot conditions,operation confirm that the stabilization of the system and the reliability of parameters detection were fine.It supply a reliable base and assurance for the study.
Design of passive wireless temperature measurement system for high voltage power equipment

Oian Chen,Guogang Zhang,Jingcun Liu,Yingsan Geng,Jianhua Wang,Qian Chen

DOI: https://doi.org/10.1109/icempe.2017.7982183

2017-05-01

Abstract:In power system, temperature rising caused by longtime overload operation or loading heavy current is one of main factors of malfunction for high voltage electrical equipment. Therefore, the temperature monitoring of high voltage power equipment during operation is very important to ensure the stability and security of power supply. In this paper, a passive wireless temperature measurement system for high voltage power equipment is designed and implemented by taking the 500kV high voltage bus bar as an example. The system measures temperature based on the thermal resistor effect of platinum and transfers data by infrared light, supplied by thermoelectric generation module (TEG). An effective heat sink is designed for the cold side of TEG. The heat sink of experimental prototype is composed of aluminum substrate, heat pipe and corona ring. On the basis of experimental prototype, the total heat resistance and the temperature distribution of heat sink and temperature difference of TEG have been calculated and phase-to-phase electric field distribution is also studied. Then the hardware and software of measurement system have been developed in the principle of low-power consumption. The experimental results show that the system can implement cyclical temperature measurement.
Design of CMOS Temperature Detection Circuit

Chen Liangsheng,HONG Zhiliang,MIN Hao,LI Lian

DOI: https://doi.org/10.3969/j.issn.1000-3819.2005.02.019

2005-01-01

Abstract:Scheme of temperature detection using standard CMOS technology is presented in this paper. Detailed analysis of the principle of temperature detection is presented too. To evaluate the feasibility of the presented methodology, a real temperature detection circuit is designed and tapped out using HHNEC CZ6H process. Test results of the circuit indicate the scheme is feasible. The circuit can work properly from -50~°C to 100~°C with a resolution of ±3~°C .
Design of a New Temperature Compensating System for High Power Circulator of EAST LHCD System

Wei Li,Lianmin Zhao,Bojiang Ding,Wendong Ma,Liang Zhu,Chengyao Peng,Zege Wu

DOI: https://doi.org/10.1117/12.2639868

2022-01-01

Abstract:The existing temperature compensating unit (TCU) of high-power circulator of EAST LHCD system has some disadvantages, such as unstable operation, high price, complex structure and difficult installation. These disadvantages will affect the performance of circulator in high-power mode, and then affect the stable operation of LHCD system. To solve these problems, this paper designs a new temperature compensating system (TCS). The new TCS takes STM32 as the main controller, and designs hardware circuits such as multi-channel temperature acquisition circuit, RS485 communication circuit and network communication circuit. At the same time, the upper computer monitoring program is developed to realize the functions of working state monitoring, real-time data display and operation data storage of physical device. The experimental results show that the new TCS can effectively maintain the performance of the circulator and provide guarantee for the high-power and stable operation of EAST LHCD system.
Design of a Temperature Monitoring Alarm System Based on the Microcontroller

Wu Jinhua

Abstract:A design of temperature monitoring alarm system is presented using DS18B20 to detect temperature,and transform the temperature signal into a digital serial output signal automatically.Microcontroller 80C51 is adopted as the main control system to receive the converted digital signals The upper and lower limits of the temperature measurement range can be set by pushing buttons,and automatically reset with booting.The 4-digit LED dynamic scanning is used to display temperature values,and ISD1420 is adopted for voice broadcast of the temperature values.

Computer Science,Engineering
On-Line Temperature Monitoring System of Electrical Equipment Based on Passive Wireless Sensor

Jin Zhu,Yang Yang,Fei Du,Zhiyi Wen,Yongqing Xiao

DOI: https://doi.org/10.1155/2022/8118680

2022-10-04

Journal of Control Science and Engineering

Abstract:In order to solve the temperature measurement problem of fully enclosed equipment for power equipment operation inspection, the authors propose an online temperature monitoring system for electrical equipment based on passive wireless sensors. Aiming at the disadvantages of traditional temperature monitoring methods, the system adopts radio frequency technology. The scheme mainly expounds the key technologies and switchgear implementation in the monitoring system research and discusses the feasibility of the system scheme through experiments. Monitor all important components at different times, and establish a temperature monitoring network to complete monitoring and management. According to the test results, in the case of overheating, the temperature can rise to more than 75°C, and the temperature difference measured wirelessly is 0.5°C, which is sufficient to indicate the health of the change. Electrical equipment, the accuracy, and real-time performance of temperature monitoring are guaranteed.
Design and Realization of Power Equipment Current-carrying Faults Intelligent Warning System

黑颖顿,鲁二峰,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2013.02.027

2013-01-01

Abstract:Current-carrying fault is one of the most popular faults of power equipments.When carrier fault occurs the contactor's temperature is higher than normal values and lead to serious result.However,the traditional methods can only do simple threshold determination,and failed to effectively extract valuable information and the diagnosis results are always unsatisfactory.To solve the problem,a new intelligent diagnosis method is proposed in this paper.Furthermore the intelligent warning system is designed and developed for power equipment current-carrying fault,and it's working principle,structure and performance are elaborated.
Design of Temperature Acquisition and Alarm System Based on GSM

Jian XU,Bao-yan ZHAO,Yu ZHOU

DOI: https://doi.org/10.3969/j.issn.1008-8423.2014.01.027

2014-01-01

Abstract:This paper presents a design of temperature collection and warning system based on GSM , which is mainly based on the LM3S811 micro controller.DS18B20 temperature sensor collects tempera-ture values in real-time,and the intrared keyboard and LCD 12864 make a simple menu .When the tem-perature value collected by the DS 18B20 is greater than the upper limit or less than the lower limit set be-fore,the system will show the alarm information by the LCD 12864 and send the current temperature value information to mobile phone which numbers was set by the infrared keyboard with the sound and light a -larming.Through the hardware platform testing , the results show that the system is stable and reliable .
Temperature Detection System Design Based on LabVIEW

Hou We

Abstract:Virtual instrument computer detection and control technology integration,when environmental parameters are measured without the use of a large number of measurement equipment,greatly reducing the cost of development. Describes the design of a data acquisition system of intelligent temperature controller based on STC89C54 RD + and Lab VIEW. Dual function machine RS232 temperature signal collected by PL2303 HX chip USB interface,to achieve a USB line can display and store the data signal which is transmitted to the host computer. The running results show that the measurement system has the advantages of high measuring precision,simple design,easy to maintain,has good visibility.

Computer Science,Engineering
Design of Phase-Shift Signal Generator with High Precision Used for Particulate Detection

Chen Xi,Chen Xiaopeng,Yu Shuibao,Lou Ping

DOI: https://doi.org/10.1016/j.proeng.2012.01.449

2012-01-01

Procedia Engineering

Abstract:Particulate detection, which is based on lock-in amplifier technology, requires a phase-shift signal generator with wide frequency range and high phase shift precision. Since the current phase-shift signal generator has a deficiency of low precision in high frequency range, the author designed a phase-shift generator which adopts direct digital frequency synthesis technology, and expresses hardware design principles of the system. This paper focuses on the design of hardware and software concerning high precision phase shift and amplitude closed-loop control. The experimental results indicate that the output signals have a high accuracy in phase difference, frequency and amplitude under a wide frequency range and this system achieves the requirements of particulate detection.
New Digital Temperature Real-time Monitoring System for High Voltage Switchgear

LI Zhi-jian,LIU Quan,DONG Yu-liang,ZHU Zhang-qing

DOI: https://doi.org/10.3969/j.issn.1001-1390.2013.01.016

2013-01-01

Abstract:A new temperature real-time monitoring system for high voltage switchgear based on infrared wireless transmission was designed,and the temperature was measured by digital temperature sensor.Power-supply was obtained from high voltage trunk by current transformer and the data was transmitted with infrared ray.By using a new method,power consumption of the system is smaller than 5mW.The experimental results indicate that the system can work with high stability and reliability,and it has low power consumption,quick response and enhanced anti-EMI capabilities.
Temperature and Humidity Detection and Monitoring System for Sealed Materiel Storage

Hao-dong RAO,Ya-lin BAI,Yu-qi GUI,Zhang-qing ZHU

DOI: https://doi.org/10.11809/scbgxb2014.08.031

2014-01-01

Abstract:Aiming at the fact that sealed materiel may leak and cause changes in temperature and humidi-ty,thus affect the performance of the materiel,in this article,a temperature&humidity detection and mo-nitoring system for sealed materiel storage is introduced.The system consists of temperature&humidity de-tection,wireless sensor networks and monitoring terminal.The real-time monitoring of temperature and hu-midity of sealing material can be realized,and the safety and reliability can also be improved.
The remote electrical equipment's infrared temperature monitoring system based on GPRS

Jin-hua LIU,Da-neng PI

DOI: https://doi.org/10.3969/j.issn.1009-2714.2014.03.002

2014-01-01

Abstract:The safe operation of electrical equipment in power system , especially the security of unmanned regional such as substation is very important .Electrical equipment fault mostly show the temperature anomaly .We must monitor electrical equip-ment temperature effectively to discover the fault as soon as possible .This paper systematically introduces the operating princi-ple of electrical equipment infrared temperature monitoring system made of monitoring center computer and remote measuring terminal using GPRS wireless mobile network and elaborates the hardware and software design of Infrared temperature measure -ment technology's remote temperature monitoring terminal .
Design of Temperature Data Acquisition and Information Processing System based on Mathematical Method

Weihuo Li,Xinwen Zhang

DOI: https://doi.org/10.1109/IMCEC51613.2021.9482187

2021-06-18

Abstract:Computer combined with mathematical methods to monitor industrial parameters has achieved good results. Temperature is one of the important parameters in industrial, military, agricultural, medical and other fields. In some particular environments, direct wiring measurements are clearly not sufficient, so wireless transmission of temperature sensing systems is particularly important. The system is divided into two parts: sending and receiving. The wireless data communication transceiver module is used to realize wireless data transmission. The sending part is based on the single-chip microcomputer. The temperature sensor is used for real-time temperature collection and wireless transmission. The collected results are verified by mathematical processing algorithm. The receiving module displays the temperature of the collection area on the LCD, and sends it to the PC through the temperature alarm device through the serial port, so as to realize the controllable temperature adjustment within a certain threshold. Compared with the traditional temperature detection system, the combination of computer and mathematical algorithm and the design of wireless transmission equipment make the system have the advantages of good real-time, high reliability, low engineering cost and low power consumption.

Engineering,Computer Science
Temperature Measure and Control Design of Air-conditioning System Based on Digital PID

ZHANG Xin-rong,XU Bao-guo

DOI: https://doi.org/10.3969/j.issn.1002-1841.2010.10.036

2010-01-01

Abstract:This paper presented the design weather temperature measure with control system controlling algorithms and outputting and the realization of the driving circuit.Systematic composition included temperature measuring,process system,the circuit of A/D changes,systematic circuit of single-chip computer,keyboard circuit and export circuit.The function of that system can realize the regulation of output power of heating wire by control procedure of single-chip computer and one-way silicon controlled rectifier,realized the temperature control of the electric heater.The signal of temperature which gather from external environment can change into digital signal with high accuracy,and showing through the single-chip computer.In view of the characteristics of the different PID parameters with the different temperature,it selects appropriate PID parameters to control on the basis of the measured temperature.The system can run reliably in practice.
On-line Detecting and Protecting Device for Oil-immersed Power Transformer

MA Shao-hua,LIU Zuo-li,CAI Zhi-yuan,LI Hai-bo

DOI: https://doi.org/10.3969/j.issn.1000-1646.2006.04.017

2006-01-01

Abstract:A novel oil-immersed power transformer on-line detecting and protecting equipment in oil-tank is presented.PIC18FXX single chip microcomputer is used as core of the equipment to realize control and(signal) acquisition.With the CCP function module,A/D converting function module,as well as CAN bus function module embedded in single chip microcomputer,only few extended peripheral circuit is needed.The design realizes the on-line detecting and fault protecting for height and temperature of(insulated) oil in transformer oil-tank.The measuring result can be sent to superior computer through CAN bus.A(particular) capacitance sensor is used to measure the oil-height in the oil-tank indirectly,and the temperature of(insulated) oil in transformer is gained by temperature sensitive parts.The device presented here possesses the characters such as lower cost,higher reliability,simpler circuit-structure,and is specially applicable to medium-pattern and small-pattern power transformers.

Temperature Detection in Generator Protecting System

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Design and Realization of Temperature Limiter Measurement and Control System

Condition Monitoring System of Simulator Test Rig for Shield Tunnelling Machine

[Temperature Measuring and Heating Controlling in Transurethral Prostate Thermotherapy System].

Detection and Control of Regenerative High Temperature Pressured Steam Generator

Design of passive wireless temperature measurement system for high voltage power equipment

Design of CMOS Temperature Detection Circuit

Design of a New Temperature Compensating System for High Power Circulator of EAST LHCD System

Design of a Temperature Monitoring Alarm System Based on the Microcontroller

On-Line Temperature Monitoring System of Electrical Equipment Based on Passive Wireless Sensor

Design and Realization of Power Equipment Current-carrying Faults Intelligent Warning System

Design of Temperature Acquisition and Alarm System Based on GSM

Temperature Detection System Design Based on LabVIEW

Design of Phase-Shift Signal Generator with High Precision Used for Particulate Detection

New Digital Temperature Real-time Monitoring System for High Voltage Switchgear

Temperature and Humidity Detection and Monitoring System for Sealed Materiel Storage

The remote electrical equipment's infrared temperature monitoring system based on GPRS

Design of Temperature Data Acquisition and Information Processing System based on Mathematical Method

Temperature Measure and Control Design of Air-conditioning System Based on Digital PID

On-line Detecting and Protecting Device for Oil-immersed Power Transformer