Abstract:The heat partition coefficient between two finite thickness contact discs during long-time sliding is studied with a coupled finite element method. Results show that the heat partition coefficient varies from its initial value to another steady state value rapidly instead of being a constant all the time. An analytical solution of the temperature field under invariant heat flux input is deduced, which tells that there exists a unique critical thickness ratio between the contact discs that keeps the heat partition coefficient a constant. An equivalent method for single-material contact bodies is proposed that is capable of calculating the steady state heat partition coefficient for any thickness ratio. It reveals that the steady state heat partition coefficient only has relationship with the mass density and the heat capacity of the materials and the thickness ratio. Based on this method, a two-step material equivalent method is further proposed for the contact discs that have friction linings on them. The solution shows that the steady state heat partition coefficient in this situation is also only determined by the material properties and the layer thicknesses. A test bench of multi-disc clutch is set up and a series of sliding experiments are conducted to validate the proposed equivalent methods and solutions of steady state heat partition coefficient. The measured experimental temperature variations show that the temperature level of the separator disc in the clutch is overestimated with the constant heat partition coefficient of semi-infinite model, while it is close to those calculated results with steady state heat partition coefficient. Therefore, the temperature fields of the contact discs during long-time sliding with constant speed can be figured out efficiently using the steady state heat partition coefficient with only small error, and these equivalent methods benefit the multi-disc clutch design and temperature estimation in practical applications.

FE Analysis for the Duet Clutch Disc Spring Stress

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Solid Modeling and Finite Element Analysis of Diaphragm Spring Clutch

Analysis of Clutch Engagement Judder and Its Influence Factors

Design and Finite Element Analysis of an Automotive Clutch Assembly

Analysis and Modeling for Electro-pneumatic AMT System

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Static Analysis and Improvement on Clutch Driven Plate Assembly

Finite Element Analysis of a Flexible Ferris Wheel

Influence of Material Parameters on the Contact Pressure Characteristics of a Multi-Disc Clutch

An Analysis on the Thermoelastic Instability of Wet Multi-disc Clutch

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method

Optimization Design for the Diaphragm Spring of Automobile Clutch

The stiffness simulation analysis of the torsion spring of synchronizing-self-shift clutch

Simulation and experiment for warp characteristic of wet multiple disc clutches

Design of a High Torque Density Single-Disc Electromagnetic Clutch

Analytical Model and Material Equivalent Methods for Steady State Heat Partition Coefficient Between Two Contact Discs in Multi-Disc Clutch

Study on Spline Stress of Separator Plates in a Wet Multi-Plate Clutch

Design of a Friction Clutch Using Dual Belleville Structures

Engagement/Disengagement Characteristics of Pull-Type Diaphragm Spring Clutch for Heavy-Duty Commercial Vehicles

Parametric Modeling and Simulation of the Gear Shaping Process of Floating Support Friction Disk