Abstract:Nowadays, energy shortage and environment pollution is increasingly serious. As a kind of renewable energy, solar energy has bright development prospect. The solar collector with energy storage was studied combining finned solar collector with phase change material (PCM). In addition, rectangular ribs were used in the air passage to enhance the heat transfer. The dimension parameter of rectangular ribs was optimized and the heat transfer process of air and PCM in the collector was analyzed by numerical simulation and experiment. In simulation, three-dimensional model of collector with different fin parameters was built and effects of dimensionless height (h/H), width (w/W), spacing (p/P) and installation angle (phi) were analyzed. The simulation results concluded the best heat transfer performance of collector was in the rib parameters of h/H=0.8, w/W=0.1, p/P=0.1 and phi=45 degrees. What's more, a three-dimensional model of solar collector with energy storage was also established. The temperature changes of PCM and air were analyzed with air flow of 0 m(3)/h, 37.72 m(3)/h, 56.58 m(3)/h and 75.44 m(3)/h to obtain heat collecting efficiency of collector. In experiment, the average temperature of PCM, outlet air temperature and heat collecting efficiency with different air flows were analyzed and compared with simulation results to verify the accuracy of simulation. The air outlet temperature was measured with the process of solidification and exothermic of PCM when the collector was running at night. In addition, the energy storage time was shortened and heat collecting efficiency was reduced when collector was under adverse working conditions. The solar collector with energy storage could store solar energy on a sunny day and release the energy on the night or cloudy day, fulfilling the use of solar energy across time and weather. (C) 2020 Elsevier Ltd. All rights reserved.

EXPERIMENTAL METHODS RESEARCH ON SOLAR COLLECTOR TIME CONSTANT

A New Method for the Measurement of Solar Collector Time Constant

A TRANSIENT TEST METHOD FOR THERMAL PERFORMANCE OF FLAT-PLATE SOLAR COLLECTORS

Numerical and Experimental Determination of Selected Performance Indicators of the Liquid Flat-Plate Solar Collector under Outdoor Conditions

Experimental Analysis of a Novel Solar PV/T Collector

EXPERIMENTAL STUDY ON PHOTO-THERMAL COUPLING REACTION AND HEAT COLLECTION BASED ON TROUGH LIGHT CONCENTRATION

Experiment of a novel collector design with concentrators and heat storage cores

Experimental Investigation on a Solar Assisted Heat Pump In-Store Drying System

A dynamic thermal performance model for flat-plate solar collectors based on the thermal inertia correction of the steady-state test method

The Experimental Study of Plastic Plate Solar Collector

Computational Simulation and Analysis of Major Control Parameters of Time-Dependent PV/T Collectors

Numerical Simulation and Experimental Validation of Tri-Functional Photovoltaic/Thermal Solar Collector

EXPERIMENTAL AND SIMULATION INVESTIGATION ON A PARABOLIC TROUGH SOLAR COLLECTOR

EXPERIMENTAL STUDY ON A DUAL-FUNCTIONAl SOLAR COLLECTOR INTEGRATED WITH BUILDING

SOLAR THERMAL PERFORMANCE OF ALL-GLASS EVACUATED COLLECTOR TUBES

Experimental Analysis on Thermal Performance of a Solar Air Collector with a Single Pass

Dynamic Thermal Performance Prediction Model for the Flat-Plate Solar Collectors Based on the Two-Node Lumped Heat Capacitance Method

Heat Transfer Study in Solar Collector with Energy Storage

Study on the second-order transfer function models for dynamic tests of flat-plate solar collectors Part I: A proposed new model and a fitting methodology

Sensitive Analysis for the Efficiency of a Parabolic Trough Solar Collector Based on Orthogonal Experiment

The Study on System Structure and Working Fluids to Improve Solar Thermal Heating Performance