Abstract:Nearly a century ago, Fischer and Tropsch discovered a means of synthesizing organic compounds ranging from C1 to C70 by reacting carbon monoxide and hydrogen on a catalyst. Fischer–Tropsch synthesis (FTS) is now known as a pseudo-polymerization process taking a mixture of CO as H2 (also known as syngas) to produce a vast array of hydrocarbons, along with various small amounts of oxygenated materials. Despite the decades spent studying this process, it is still considered a black-box reaction with a mechanism that is still under debate. This investigation sought to improve our understanding by taking data from a series of experimental Fischer–Tropsch synthesis runs to build a computational model. The experimental runs were completed in an isothermal continuous stirred-tank reactor, allowing for comparison across a series of completed catalyst tests. Similar catalytic recipes were chosen so that conditional comparisons of pressure, temperature, SV, and CO/H2 could be made. Further, results from the output of the reactor that included the deviations in product selectivity, especially that of methane and CO2, were considered. Cobalt was chosen for these exams for its industrial relevance and respectfully clean process as it does not intrinsically undergo the water–gas shift (WGS). The primary focus of this manuscript was to compare runs using cobalt-based catalysts that varied in two oxide catalyst supports. The results were obtained by creating two differential equations, one for H2 and one for CO, in terms of products or groups of products. These were analyzed using sensitivity analysis (SA) to determine the products or groups that impact the model the most. The results revealed a significant difference in sensitivity between the two catalyst–support combinations. When the model equations for H2 and CO were split, the results indicated that the CO equation was significantly more sensitive to CO2 production than the H2 equation.

Fischer-Tropsch synthesis: Kinetics and effect of water for a Co/Al2O3 catalyst

The Effect of Hydrophobically Modified Iron Catalysts with Hexadecyltrimethoxysilane on Fischer‐Tropsch Synthesis

Intrinsic Kinetics of ZrO2 Modified Co-Ru/γ-Al2O3 Catalyst for F-T Synthesis

Effect of Co-fed Water on a Co-Pt-Si/γ-Al2O3 Fischer-Tropsch Catalyst Modified with an Atomic Layer Deposited or Molecular Layer Deposition Overcoating

Fischer–Tropsch Synthesis: Higher Oxygenate Selectivity of Cobalt Catalysts Supported on Hydrothermal Carbons

A Density Functional Theory Study on the Water Formation at High Coverages and the Water Effect in the Fischer–Tropsch Synthesis

Fischer-Tropsch Synthesis on Fe-Co-Pt/γ-Al2O3 catalyst: A mass transfer, kinetic and mechanistic study

Mechanism of Cobalt-Catalyzed CO Hydrogenation: 2. Fischer–Tropsch Synthesis

Kinetic estimation of Fischer–Tropsch synthesis using biogas-derived feedstocks over Ni/Al2O3 catalyst

Kinetic study of Fe & Co perovskite catalyst in Fischer–Tropsch synthesis

Fischer-Tropsch Cobalt Activations: The Role of Water on Catalyst Reduction

Effect of Co-Feeding Carbon Dioxide on Fischer–Tropsch Synthesis over an Iron–manganese Catalyst in a Spinning Basket Reactor

Impact of H2/CO Ratios on Phase and Performance of Mn-modified Fe-based Fischer Tropsch Synthesis Catalyst

The effect of surface acidic and basic properties of highly loaded Co catalysts on the Fischer–Tropsch synthesis

Effect of the CO coverage on the Fischer–Tropsch synthesis mechanism on cobalt catalysts

Catalytic Performance of Alumina-Supported Cobalt Carbide Catalysts for Low-Temperature Fischer–Tropsch Synthesis

Fischer-Tropsch Synthesis: The Characterization and Testing of Pt-Co/SiO2 Catalysts Prepared with Alternative Cobalt Precursors

Insight into the Physicochemical Properties of Co-Based Catalysts in Fischer–Tropsch Synthesis

Fischer–Tropsch Synthesis: Computational Sensitivity Modeling for Series of Cobalt Catalysts

CO activation pathways and the mechanism of Fischer–Tropsch synthesis

Sorption-enhanced Fischer-Tropsch synthesis – Effect of water removal