Abstract:There is a growing concern about the effect of palladium on human health because of the toxicity and increasing occurrence of palladium as a result of its extensive use in automotive catalytic converters. Development of reliable analytical methodologies for the determination of palladium in environmental materials is of great importance for critical evaluation of the possible risks for human health. In this work, a displacement solid-phase extraction technique was developed and online coupled to electrothermal atomic absorption spectrometry (ETAAS) for selective and sensitive determination of trace palladium in environmental samples without need of any special selective complexing agents, selective sorbents, and masking agents. The developed methodology involved the online formation of copper pyrrolidine dithiocarbamate (Cu-PDC), and the resultant Cu-PDC was extracted onto a microcolumn packed with the sorbent from a cigarette filter. Trace Pd(II) was selectively preconcentrated through loading the sample solution onto the microcolumn by online displacement reaction between Pd(II) and the extracted Cu-PDC on the microcolumn. The retained analyte was subsequently eluted with 40 microL of ethanol for online ETAAS determination. Interferences from coexisting heavy metal ions with lower stability of their PDC complexes relative to Cu-PDC were minimized. The tolerable concentrations of Cd-(II), Fe(III), Co(II), Mn(II), Cr(III), and Zn(II) were up to 2, 6, 40, 2, 1.5, and at least 100 mg L(-1), respectively. Compared with conventional solid-phase extraction methodology, the developed displacement solid-phase extraction protocol gave 2-4 orders of magnitude improvement in the maximum tolerable concentrations of coexisting heavy metal ions. With the consumption of only 2.8 mL of sample solution, an enhancement factor of 52 and a detection limit (3sigma) of 18 ng L(-1) were achieved at a sample throughput of 30 samples h(-1). The precision (RSD, n = 13) was 2.5% at the 1 microg L(-1) level. The present methodology was successfully applied to selective determination of trace palladium in local road dusts and roadside soils.

Vapor Generation-AAS Determination of Trace Amounts of Palladium in Catalysts

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Sensitive Determination of Arsenic by Photochemical Vapor Generation with Inductively Coupled Plasma Mass Spectrometry: Synergistic Effect from Antimony and Cadmium

Selective quantification of trace palladium in road dusts and roadside soils by displacement solid-phase extraction online coupled with electrothermal atomic absorption spectrometry.

Investigation of Organic Phase Chemical Vapor Generation-Atomic Fluorescence Spectrometry in the Determination of Tin

Voltammetric Determination of Trace Palladium by Carboxylic Carbon Nanotubes Modified Glass Carbon Electrode

Cadmium-Assisted Photochemical Vapor Generation of Arsenic from Low Concentration of Formic Acid Media

Performance Parameters of Inductively Coupled Plasma Optical Emission Spectrometry and Graphite Furnace Atomic Absorption Spectrometry Techniques for Pd and Pt Determination in Automotive Catalysts

A Further Catalysis Mechanism Study on Amberlyst 35 Resins Application in Alkylation Desulfurization of Gasoline

Simultaneous Removal of Ethanol, Acetaldehyde and Nitrogen Oxides over V-Pd/γ-Al2O3-TiO2 Catalyst

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Design And Synthesis Of Model And Practical Palladium Catalysts Using Atomic Layer Deposition

Resolving Precursor Deligation, Surface Species Evolution, and Nanoparticle Nucleation during Palladium Atomic Layer Deposition

Determination of vanadium in Natural gas using graphite furnace atomic absorption spectrometry (GFAAS)

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

Chemical vapor generation of tungsten for atomic spectrometric determination: Homogeneous sensitizer and mechanism study

Subnanometer Palladium Particles Synthesized by Atomic Layer Deposition

Removal Of Volatile Organic Compounds At Low Temperature By A Self-Assembled Pt/Gamma-Al2o3 Catalyst

Determination of Palladium as an Elemental Impurity in Ropivacaine Hydrochloride Monohydrate by Atomic Absorption Spectrometer

Electrothermal Desolvation-Enhanced Dielectric Barrier Discharge Plasma-Induced Vapor Generation for Sensitive Determination of Antimony by Atomic Fluorescence Spectrometry

Preparation of Gas Recombining Palladium Catalysts for VRLA Battery by Electroless Plating