Abstract:ZnO thin films were prepared by radio frequency (RF) reactive magnetron sputtering at varying deposition conditions. The effects of RF power (from 40 to 90 W) and substrate temperature (from 100 to 200 degrees C) on the grain growth behavior, surface morphology evolution, and the structural and optical properties of the films were investigated. Atomic force microscopy (AFM) measurements confirmed that the grain size and surface roughness depend mainly on the RF power and increase with increasing it at the initial deposition stage of 5 s, and are strongly affected by the substrate temperature and increase with increasing it at the final deposition stage of 45 min. The influence of both the deposition parameters on the surface structure of the ZnO films at different deposition stages and the mechanism concerning this influence were discussed. The X-ray diffraction (XRD) and optical absorption spectra analysis indicated that all the films deposited for 45 min are in the state of the compressive stress and exhibit polycrystalline nature with the (002) preferential orientation, and they have high optical transparency in the visible range and sharp absorption edges around the wavelength 360 nm corresponding to the ZnO exciton. With the increase of the RF power and substrate temperature, the grain size increases, the residual compressive stress relaxes, and the optical band gaps broaden. In comparison with the RF power, the substrate temperature has more evident influence on the microstructure of the ZnO thin films.

Roughness Evolution of ZrO2 Thin Films Grown by Reactive Ion Beam Sputtering

The growth of nanoscale ZnO films by pulsed-spray evaporation chemical vapor deposition and their structural, electric and optical properties

Dynamic Scaling in Growth of Zro2 Thin Films Prepared by Electronic Beam Evaporation

Mechanical Properties Of Zirconia Thin Films Deposited By Filtered Cathodic Vacuum Arc

Structural evolution of ZnO films deposited by rf magnetron sputtering on glass substrate

Thickness-dependent structural and optical properties of sputter deposited ZrO2 films

Interfacial and microstructural properties of zirconium oxide thin films prepared directly on silicon

Smoothing of Zno Films by Gas Cluster Ion Beam

Grain Growth Behavior, Surface Morphology Evolution, Structures, and Optical Properties of Zno Thin Films Prepared by Rf Reactive Magnetron Sputtering

Investigation of Roughness Evolution of Ion Sputtered Fused Silica Surface.

Study on the roughness evolution of optical surfaces during ion beam sputtering

Structural and Optical Characterizations of ZnO Films Grown by Reactive Electron Beam Evaporation

Structural, interfacial and optical characterization of ultrathin zirconia film grown by in situ thermal oxidation of sputtered metallic Zr films

The Surface Modification of ZrO2 Film by Zr/Nb Ion Implantation and First-Principles Calculation

Surface roughness of alumina films deposited by reactive r.f. sputtering

Growth and characterisation of zirconia surfaces on Cu(111)

High-Quality ZrO2 Thin Films Deposited on Silicon by High Vacuum Electron Beam Evaporation

Deposition Of High K Zro2 Thin Films By High Vacuum Electron Beam Evaporation At Room Temperature

Nanocrystallization of Zirconium Subjected to Surface Mechanical Attrition Treatment

Optical Properties and Structural Characterization of Bias Sputtered ZrO2 Films