Abstract:We examine the precipitation and creep behavior of Al-0.5Mn-0.02Si (at.%) alloys, with and without the L12-forming elements Zr and Er (0.09 and 0.05 at.%, respectively), utilizing isochronal aging experiments as well as compressive and tensile creep tests performed between 275 and 400 °C. The Al-0.5Mn-0.09Zr-0.05Er-0.05Si alloy exhibits an unusually high creep resistance in the peak-aged state, which is significantly better than that observed generally in its Mn-free L12-strengthened counterparts; for example, the creep threshold stresses at 300 °C are 34-37 MPa, about three times higher than those in a Mn-free Al-0.11Zr-0.005Er-0.02Si alloy. Scanning transmission electron microscopy illustrates that nanoscale Al 3 (Zr,Er) L1 2 -precipitates are formed in the dendritic cores and micron-sized Al(Mn,Fe)Si α-precipitates in the inter-dendritic channels. Moreover, the Al(f.c.c.)-matrix remains supersaturated with randomly distributed Mn solute atoms, as determined by atom-probe tomography and electrical conductivity measurements, for months at creep temperatures. Creep experiments on the Zr- and Er-free Al-0.5Mn-0.02Si solid-solution alloy reveal a small primary creep strain, a high apparent stress exponent, na ~9-7, and a threshold-stress-type behavior. After ruling out other possible mechanisms, we provide evidence that the threshold stress in this precipitate-free alloy originates from dislocation/solute elastic interactions leading to a strong drag force exerted on edge dislocations, hindering their ability to climb. The relatively high creep resistance of Al-0.5Mn-0.09Zr-0.05Er-0.05Si is interpreted in terms of the synergy between this solute-induced threshold stress (SITS, from Mn in solid-solution) and the known precipitate-bypass threshold stress (from the L12-nanoprecipitates).

Experimental-Evidence For Harper-Dorn Creep In Mn-Zn Ferrite

Harper-dorn creep in polycrystalline ferrite, beryllia, alumina, calcite and olivine

Harper-Dorn creep in olivine

Comments on the internal stress model of Harper-Dorn creep

On the Transition from Power-Law Creep to Diffusional Creep

Dependence of dislocation density in Harper-Dorn creep on the peierls stress

On The Transitions Among Different Creep Regimes

Establishment of a steady dislocation density by the Peierls stress in Harper-Dorn creep

An Investigation of the Deformation Mechanism in Grain Size-Sensitive Newtonian Creep

An Atomistic Study of Diffusion-Mediated Plasticity and Creep using Phase Field Crystal Methods

Elevated-temperature Deformation Mechanisms in a CrMnFeCoNi High-Entropy Alloy

A Mechanism-Based Elasto-Viscoplastic Constitutive Model for the Creep Deformation of Martensitic Heat-Resistant Steels

Evidence of Inverse Hall-Petch Behavior and Low Friction and Wear in High Entropy Alloys

Ratcheting-creep Interaction of Advanced 9–12% Chromium Ferrite Steel with Anelastic Effect

Study on the microstructures and tensile creep behaviors of extruded dilute Mg–Mn–Zn alloys

Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys.

Predicting Creep Strengths and Lifetimes of Creep Resistant Engineering Alloys

Solute-induced strengthening during creep of an aged-hardened Al-Mn-Zr alloy

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation

Creep deformation of WC hardmetals with iron-based binders

Electromigration-Induced Coble Creep in Polycrystalline Materials