Abstract:Geological structure of the subsurface of the Moon provides valuable information on lunar evolution. Recently, Chang׳E-3 has utilized lunar penetrating radar (LPR), which is equipped on the lunar rover named as Yutu, to detect the lunar geological structure in Northern Imbrium (44.1260N, 19.5014W) for the first time. As an in situ detector, Chang׳E-3 LPR has relative higher horizontal and vertical resolution and less clutter impact compared to spaceborne radars and earth-based radars.In this work, we analyze the LPR data at 500MHz transmission frequency to obtain the shallow subsurface structure of the landing area of Chang׳E-3 in Mare Imbrium. Filter method and amplitude recovery algorithms are utilized to alleviate the adverse effects of environment and system noises and compensate the amplitude losses during signal propagation. Based on the processed radar image, we observe numerous diffraction hyperbolae, which may be caused by discrete reflectors beneath the lunar surface. Hyperbolae fitting method is utilized to reverse the average dielectric constant to certain depth (ε¯). Overall, the estimated ε¯ increases with the depth and ε¯ could be classified into three categories. Average ε¯ of each category is 2.47, 3.40 and 6.16, respectively. Because of the large gap between the values of ε¯ of neighboring categories, we speculate a three-layered structure of the shallow surface of LPR exploration region.One possible geological picture of the speculated three-layered structure is presented as follows. The top layer is weathered layer of ejecta blanket with its average thickness and bound on error is 0.95±0.02m. The second layer is the ejecta blanket of the nearby impact crater, and the corresponding average thickness is about 2.30±0.07m, which is in good agreement with the two primary models of ejecta blanket thickness as a function of distance from the crater center. The third layer is regarded as a mixture of stones and soil. The echoes below the third layer are in the same magnitude as the noises, which may indicate that the fourth layer, if it exists, is uniform (no clear reflector) and its thickness is beyond the detection limit of LPR. Hence, we infer the fourth layer is a basalt layer.

Large-size topography scanning with laser radar

The Staring Imaging Laser Radar Based on Plane Array Detector

Design of 3D Laser Radar Based on Laser Triangulation

Simulation of Radar Sounder Echo from Lunar Surface and Subsurface Structure

High-Performance Numerical Simulation of Radar Wave Scattering Due to Topographic Roughness

Research on Ultrasonic Measurement of the Large Curved Surface Parts

A Multiangle Aperture Synthesis Algorithm for Ground-Based Radar Lunar Surface Imaging

A New Conception of Multi-Stage DBF Based Spaceborne High-Resolution Wide-Swath SAR System

Laser Scanning Imaging System Research and Development Trend Analysis

Simulation of Lunar Comprehensive Substructure With Fracture and Imaging of Later LPR Data From Chang’e-4 Mission

Focused Lunar Imaging Experiment Using the Back Projection Algorithm Based on Sanya Incoherent Scatter Radar

Structural Analysis of Lunar Subsurface with Chang׳E-3 Lunar Penetrating Radar

Simulation of Multiangular Radar Echoes for Speed Measurement During CE-3 Landing on the Lunar Sinus Iridum Surface

Lunar Exploration Based on Ground-Based Radar: Current Research Progress and Future Prospects

Automatic Extraction of 3-D Information of Lunar Surface Rocks Using Topography Data

Laser tracker used in multi-radius test of microwave radar for rendezvous and docking

Centimeter-Scale Surface Roughness of the Chang'E Landing Regions and Implications for Radar Scattering Mechanisms

The Application Research of Ground Penetrating Radar Technology to Lunar Exploration

Centimeter-scale Surface Roughness of the Chang’E Landing Regions and Implications for Radar Scattering Mechanisms

Moon Imaging Performance of FAST Radio Telescope in Bistatic Configuration with Other Radars

Lunar Regolith Stratigraphy Analysis Based on the Simulation of Lunar Penetrating Radar Signals