Abstract:Geological structure of the subsurface of the Moon provides valuable information on lunar evolution. Recently, Chang׳E-3 has utilized lunar penetrating radar (LPR), which is equipped on the lunar rover named as Yutu, to detect the lunar geological structure in Northern Imbrium (44.1260N, 19.5014W) for the first time. As an in situ detector, Chang׳E-3 LPR has relative higher horizontal and vertical resolution and less clutter impact compared to spaceborne radars and earth-based radars.In this work, we analyze the LPR data at 500MHz transmission frequency to obtain the shallow subsurface structure of the landing area of Chang׳E-3 in Mare Imbrium. Filter method and amplitude recovery algorithms are utilized to alleviate the adverse effects of environment and system noises and compensate the amplitude losses during signal propagation. Based on the processed radar image, we observe numerous diffraction hyperbolae, which may be caused by discrete reflectors beneath the lunar surface. Hyperbolae fitting method is utilized to reverse the average dielectric constant to certain depth (ε¯). Overall, the estimated ε¯ increases with the depth and ε¯ could be classified into three categories. Average ε¯ of each category is 2.47, 3.40 and 6.16, respectively. Because of the large gap between the values of ε¯ of neighboring categories, we speculate a three-layered structure of the shallow surface of LPR exploration region.One possible geological picture of the speculated three-layered structure is presented as follows. The top layer is weathered layer of ejecta blanket with its average thickness and bound on error is 0.95±0.02m. The second layer is the ejecta blanket of the nearby impact crater, and the corresponding average thickness is about 2.30±0.07m, which is in good agreement with the two primary models of ejecta blanket thickness as a function of distance from the crater center. The third layer is regarded as a mixture of stones and soil. The echoes below the third layer are in the same magnitude as the noises, which may indicate that the fourth layer, if it exists, is uniform (no clear reflector) and its thickness is beyond the detection limit of LPR. Hence, we infer the fourth layer is a basalt layer.

High-Performance Numerical Simulation of Radar Wave Scattering Due to Topographic Roughness

Simulation of Radar Sounder Echo from Lunar Surface and Subsurface Structure

Simulation And Analysis Reflections Interference From Above Surface Objects Of Ground Penetrating Radar

Centimeter-scale Surface Roughness of the Chang’E Landing Regions and Implications for Radar Scattering Mechanisms

Centimeter-Scale Surface Roughness of the Chang'E Landing Regions and Implications for Radar Scattering Mechanisms

Comparative analysis of reflection characteristics of lunar penetrating radar data using numerical simulations

Modeling Radar Scattering from the Lunar Regolith: Parametric Study on the Effect of Roughness and Ice Inclusions on CRP Measurement

A Numerical Model of CPR of Rough Surface with Discrete Scatterers for Analysis of Mini‐RF Data

Numerical Simulation And Quantitative Study Of Polarization Radar Echoes From Rough Lunar Surface

Simulation of Lunar Comprehensive Substructure With Fracture and Imaging of Later LPR Data From Chang’e-4 Mission

VHF radar echoes from layering scatter media and applications to lunar exploration and landslides monitoring

Quantitative Study of the Anomalous Scattering Echoes of Rough Lunar Surface by V-SMCG Algorithm

Modeling polarimetric radar scattering from the lunar surface: Study on the effect of physical properties of the regolith layer

Impact of Roughness on Circular-Polarization-Ratio Anomalies of Lunar Rough Surfaces

Structural Analysis of Lunar Subsurface with Chang׳E-3 Lunar Penetrating Radar

Numerical Cpr Simulation Of Polarimetric Echoes From Moon Cratered Surface For Analysis Of Mini-Rf Data

Analysis of Polarizing Parameters of Lunar Craters Using High-resolution Images Based on Radar

Velocity Analysis Using Separated Diffractions for Lunar Penetrating Radar Obtained by Yutu-2 Rover

The Application Research of Ground Penetrating Radar Technology to Lunar Exploration

Numerical Investigation of Rayleigh-wave Propagation on Topography Surface

Simulation of Pol-SAR Imaging and Data Analysis of Mini-RF Observation From the Lunar Surface