Abstract:Titanium (Ti) and its alloys are widely used in bone defect repair owing to their advantages, including high strength, corrosion resistance, and biocompatibility. The formation of a stable oxide layer on Ti implants enhances the osseointegration process. Nevertheless, additional progress is required to improve the incorporation of these implants at the microscopic and nanoscopic levels to achieve a biocompatible interface. The main objective of this study was to enhance the morphology of hydroxyapatite and the corrosion resistance of Ti implants by applying hydroxyapatite/chitosan (HA/Cs) nanocomposite coatings embedded with carboxylic acids. The coatings were fabricated by electrodeposition, wherein various acid concentrations (acrylic and acetic acids) were employed as Cs electrolyte solvents to enhance the adhesion and bond strength with the titanium metal substrate. The microstructures of the HA/Cs coatings were analyzed using X-ray diffraction. The results demonstrated that the structure of HA was affected by the type of acid used and its concentration as the crystallinity increased with a high concentration of acrylic acid. Additionally, the morphology of HA/Cs was analyzed using a transmission electron microscope. The results showed that the morphology of HA/Cs changed from a hexagonal rod-like shape with acrylic acid samples into a needle-like shape in acetic acid samples. The corrosion behavior was investigated using electrochemical impedance spectroscopy (EIS) in a simulated body fluid (SBF) at 37oC±2. The EIS results showed a high corrosion resistance with phase angles close to −80° and high impedance values of 80.5 kΩ cm 2 with a high concentration of acrylic acid. These results indicated the formation of a highly adhesive and stable film on the implants in the test solution. In conclusion, based on this study and our previous work, the corrosion resistance, good biocompatibility, and biomineralization properties of the prepared HA/Cs-coated Ti recommend it as an alternative implant for clinical applications.

Properties and immersion behavior of magnetron-sputtered multi-layered hydroxyapatite/titanium composite coatings.

Characterization of Functionally Graded Hydroxyapatite/titanium Composite Coatings Plasma‐sprayed on Ti Alloys

Characterization of Hydroxyapatite and Titanium Coatings Sputtered on Ti-6Al-4V Substrate.

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Structural And Physical Properties Of Magnetron Co-Sputtered Silver Containing Hydroxyapatite Coatings On Titanium Substrates

Preparation and Characterization of Manganese and Fluorine Co-Modified Hydroxyapatite Composite Coating

Structural characterization, mechanical, and electrochemical studies of hydroxyapatite-titanium composite coating fabricated using electrophoretic deposition and reaction bonding process.

Recent advances in multifunctional hydroxyapatite coating by electrochemical deposition

In Vitro Evaluation of Biologically Derived Hydroxyapatite Coatings Manufactured by High Velocity Suspension Spraying

High-resolution Transmission Electron Microscopy Investigations of a Highly Adhesive Hydroxyapatite Coating/titanium Interface Fabricated by Ion-Beam-assisted Deposition.

Structural, mechanical, electrical, and biocompatibility investigation of nanostructured hydroxyapatite coating on alumina by radio frequency magnetron sputtering

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium

Advancements in biomedical coatings: A comprehensive review of DC magnetron sputtering on Ti–6Al–4V alloy

Hydroxyapatite Coating with Strong (002) Crystallographic Texture Deposited by Micro-Plasma Spraying

Processing and in vitro behavior of hydroxyapatite coatings prepared by electrostatic spray assisted vapor deposition method

Influence of a hard transition layer on the microstructure and properties of diamond-like carbon/hydroxyapatite composite coating prepared by magnetron sputtering

Preliminary Aspects Regarding the Anticorrosive Effect of Multi-Layered Silane–Hydroxyapatite Coatings Deposited on Titanium Grade 2 for Medical Applications

Hydroxyapatite based on Abalone Mussel Shells Coating on Titanium Alloy using Electrophoretic Deposition Dip Coating as a Bone Implant Candidate

Investigation of structure, morphology, and corrosion behavior of carboxylic acids/hydroxyapatite/chitosan coatings on Ti disks for implants

[Hydroxyapatite bioactive coating on carbon/carbon composites]

Evaluation of Nanostructured Carbonated Hydroxyapatite Coatings Formed by a Hybrid Process of Plasma Spraying and Hydrothermal Synthesis