Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Inverse Dynamics Modeling and Nonlinear Controller Design of the Similar Model of a Forging Manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Hydraulic Systems Control Based on the Characteristics of Major-Motion Mechanism for an Open-Die Forging Manipulator

Design and Simulation of Similar Model of a Forging Manipulator

Robust nonlinear controller design for improving the working rate of forging manipulators

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Vertical Load Analysis of the Lifting Systems for Forging Manipulator During the Forging Process

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Hydraulic System Design and Simulation of the Forging Manipulator

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Velocity Control of the Horizontal Buffer System for Heavy Load Forging Manipulator

A model-free nonlinear output feedback controller for robot manipulators

Design of the Turbo PMAC-based control system for a forging manipulator similar model

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator

Sliding Mode Control for Underwater Multi-DoF Hydraulic Manipulator

Research on Decoupling Performance of Major-motion Mechanism for Forging Manipulators

Simulation Research on Driving Hydraulic Control System of Forging Manipulator Based on AMESim

Analysis And Control Of A 4-Dof Manipulator To Operate Inside Narrow And Long Pipes