Application of Active Power Filter in Harmonic-Suppression

Wei Zhenzhong

2009-01-01

Abstract:This article discusses the harmonic pollution in the workshop's transformer substation,introduce the principle of the Parallel Active Power Filter using in the harmonic -suppression.Through the practical application introduce a plastic factory energy-saving effect achieved by the use of APF.

What problem does this paper attempt to address?

Analysis of a Novel Hybrid Series Active Power Filter Topology

Wei Wu,Tong Li,Zhao Qian,Fang Zheng Peng

2004-01-01

Abstract:The basic principles for suppressing the harmonics of the conventional series hybrid active power filter (SHAPF) are analyzed qualitatively. Based on these, a novel series hybrid active power filter is proposed. Compared with the conventional series active power filter (SAPF) or the series hybrid active power filter, its active part only needs to suppress some low order harmonics. So the capacity factor of the inverter's DC voltage is much improved and the power fating of the active part is decreased markedly, while its filter quality does not decline. The detailed theoretical analysis is given, and the feasibility is verified through simulation and experiment on a 10kVA prototype.
Status quo of active power filter technology

Wu Fei,Zhang Yanchi,Xie Da,Shu Xiaoqiong

2006-01-01

Abstract:The Active Power Filter(APF) technology which adopts the modern power electronic technology,digital signal processing technology,and advanced control theories can conduct dynamic real-time compensation for gird harmonics,and is an effective approach with great potential to solve harmonic pollution and improve power quality.The basic structure and working principle of the APF are presented,and its methods for detecting the harmonic current and controlling the compensating current are discussed.
A Hybrid Solution To Active Power Filter For The Purpose Of Harmonic Suppression And Resonance Damping

Gz Chen,L Ma,Zm Ye,Zm Qian

DOI: https://doi.org/10.1109/ICPST.1998.729346

1998-01-01

Abstract:Active Power Filters (APFs) have been intensively explored in the past decade. Various topologies and control schemes have been documented aiming at reducing the cost and improving the performance of the compensation system. This paper highlights the essence of the mechanisms of diverse Active Power filters(APFs) by the concepts of controllable sources. Four basic active units for the comprehensive APFs can be employed in the circuit branch to control the impedance of the branch. This paper also forwards a general principle for constructing new hybrid APFs to suppress harmonics. The principle can be easily used to find new approaches for cost-effective hybrid APFs. One hybrid solution is provided in this paper.
Harmonics suppression techniques

Zhaoming Qian,Zhongming Ye,Bofan Dong

1997-01-01

Abstract:In this paper, commonly used tehniques for harmonic suppression are briefly reviewed. It puts emphasis on two main classes of approaches, passive and active. Concerning the passive techniques, passive filters (PFs). shunted active power filters (PAPFs). series active power filters (SAPFs). various hybrid active power filters (HAPFs) and their advantages and disadvantages are discussed. For active techniques, the modern multi-pulse rectifying, multi-level converters, PWM and 3-phase PFC converters are discussed concisely.
Active Power Filter for Harmonie Compensation Using a Digital Dual-Mode-structure Repetitive Control Approach

Zhixiang Zou,Zheng Wang,Ming Cheng,Yongheng Yang

DOI: https://doi.org/10.1109/pedg.2012.6253995

2012-01-01

Abstract:This paper presents an digital dual-mode-structure repetitive control approach for the single-phase shunt active power filter (APF), which aims to enhance the tracking ability and eliminate arbitrary order harmonic. The proposed repetitive control scheme blends the characteristics of both odd-harmonic repetitive control and even-harmonic repetitive control. Moreover, the convergence rate is faster than conventional repetitive controller. Additionally, the parameters have been designed and optimized for the dual-mode structure repetitive control to improve the performance of APF system. Experimental results on a laboratory setup are given to verify the proposed control scheme.
Power Quality Enhancement Using a Novel Hybrid Active Power Filter Device under Nonlinear Loads

Weijun Yun,Gang Yao,Lidan Zhou,Chen,Junmin Pan

DOI: https://doi.org/10.4028/www.scientific.net/amr.516-517.1419

2012-01-01

Advanced Materials Research

Abstract:Nonlinear loads generate a large amount of characteristic harmonics , deteriorate the power quality of power distribution systems in Advanced manufacturing enterprises. In this paper a novel hybrid active power filter is proposed which consists of a series thyristor switched filter (TSF) and small rated shunt active power filter(APF). TSF is tuned at fifth and seventh order harmonic frequencies. Consequently APF compensates for third and other order harmonics, unbalance current and reactive power. A new control method based on PHC strategy is presented for APF. The device has already got an application in one of the transformer substations of a automobile factory. It’s revealed that the proposed device can improve the power factor , reduce the harmonics injection and enhancement power quality of the power distribution systems.
General principle of active power filter and its application

Guozhu Chen,Zhengyu Lü,Zhaoming Qian

2000-01-01

Abstract:This paper highlights the essential principle of diverse APF (Active Power Filters) based on the mechanism that controllable sources can change branch impedance. Four basic active units and three general methods of the realization of APF can be got according to this principle. It's suitable for new APF topology and easy for constructing new hybrid APF to suppress harmonics. The analysis, application example, simulation and model experiment of this principle are given in the paper. The principle is universal and helpful, the study of APF and its application.
APPLICATION OF ACTIVE POWER FILTER IN DECREASING HARMONICS IN PHASE-CONTROLLED POWER SOURCE

卓放,裴云庆,周新,李可,王兆安,周嗣信,张曙,张显来,冯秀明

DOI: https://doi.org/10.3321/j.issn:1000-3673.2004.02.010

2004-01-01

Abstract:The operational status of a 120kVA active power filter (APF) in decreasing the harmonics from exciting power source for heavy-hydronium accelerator is presented. Because of the phase-controlled rectifying mode of above mentioned power source, harmonic pollution in the power network is severe. Using APF the harmonic pollution in power network is effectively restrained. The working situation of the exciting power source for heavy-hydronium accelerator, the structure of the main circuit of the applied APF and its control method are dissertated in detail. The results of experimental operation of APF in the harness of harmonic pollution from the exciting power source for heavy-hydronium accelerator are given.
A Novel Active Power Filter for High Voltage Application

ZM Ye,B Dong,ZM Qian

DOI: https://doi.org/10.1109/pesc.1998.703236

1998-01-01

Abstract:A new active power filter (APF) is proposed in this paper which combines the two mechanisms of harmonic tracking and cancellation as well as variable resistance. This strategy greatly reduces the requirement of the passive filter. A shunt resonant passive filter, which falls in resonance in the fundamental frequency and 6/sup th/ harmonics, is employed in this paper mainly to reduce the fundamental current loss of the HAPF. Simulation results demonstrate that the system can suppress harmonics from 2th to 20th with more than 20 dB attenuation and 10 Hz-30 Hz with approximately 20 dB. The HAPF expands the pass-band width of the PF, while demonstrates high impedance at fundamental frequency.
Study on a novel hybrid active power filter

Zhongming Ye,Zhengyu Lü,Zhaoming Qian

1999-01-01

Abstract:A novel hybrid active power filter (HAPF) controlled simultaneously by the harmonic voltage from the network and the harmonic current from the load is presented. A series parallel resonance passive filter is adopted. The theoretical analysis and compensation characteristics of the HAPF as well as design of the passive filter are given. The simulation results show that the HAPF is suitable for harmonics suppression for most of power electronic equipment.
Lecture on Electrical Energy Quality Ⅵ. Power Harmonic Filter

CHENG Haozhong

DOI: https://doi.org/10.3969/j.issn.1001-5531.2007.12.016

2007-01-01

Abstract:Active power filter (APF) and AC Harmonic filter is one of the most important measures to suppress the harmonic. The AC harmonic filter from some aspects, such as the principle, the connection mode and the choice of filter’s parameters, were systemically introduced. The principle and development of APF were introduced briefly.
New Hybrid Active Power Filter with Low Additive Reactive Current Injection

HAN Long-fei,CHEN Guo-zhu

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.10.013

2007-01-01

Abstract:A simple study on traditional hybrid active filter was introduced,which was not suitable for harmonic compensation in high power factor conditions due to the high fundamental impedance and the large additive reactive current injection.Then a new topology of hybrid active power filter with improved passive filter was proposed.Compared with the traditional one,the new topology has the advantages include reducing the reactive current injecting into the main grid,having better impedance-frequency characteristic,using fewer passive component,makes up the deficiency used in high power factor circumstance,and owns a brighter future.
Analysis and Suppression of Conductive EMI Originated by an Active Power Filter

WJ Lei,Y Wang,F Zhuo,JJ Liu,X Zhai,WB Si,ZA Wang

DOI: https://doi.org/10.1109/ias.2005.1518514

2005-01-01

Abstract:In this paper, the generation and path of conductive EMI in an Active Power Filter (APF) are analyzed and the method to suppress the noise is presented. APF is a kind of PWM converter which aims at solving the harmonic problem originated by nonlinear-load in power system. As compensating the low frequency harmonic components, it also generates electromagnetic noise in high frequency band. Following the operation principle and implementation of an APF, the mechanism and flowing path of two kinds of conductive EMI noise generated by the APF are analyzed. Then, the EMI filter is designed to decrease the EMI noise. In order to further reduce the switching noise, the multi-modular approach has been applied. An additional advantage of this approach is the high equivalent switching frequency in large power rating converter. Field and experimental tests were conducted to verify the analysis and suppression measures.
Design of Hybrid Power Filters for Supraharmonics Suppression in Power Electronics Dominated Power Systems

Jiahao Li,Yingjie He,Longyu Xu,Jinjun Liu

DOI: https://doi.org/10.1109/jestpe.2024.3365167

IF: 5.462

2024-01-01

IEEE Journal of Emerging and Selected Topics in Power Electronics

Abstract:With the rapid development of power electronics dominated power systems, the impact of supraharmonics generated by power electronic devices on power quality is becoming more and more significant, leading to supraharmonics becoming a new type of power quality problem that cannot be ignored. Current research of supraharmonics focuses on the generation mechanism, propagation mechanism, interaction effects, measurement and standardization, but no effective suppression scheme for supraharmonics has been proposed so far. This article proposes a hybrid power filter (HPF) scheme suitable for dealing with supraharmonics in low-voltage power distribution networks, which is composed of a passive part and an active part connected in series. Among them, the active part is a linear amplifier circuit with high bandwidth for supraharmonics compensation, and the passive part is used to share the grid fundamental frequency voltage drop. In this article, it is verified through simulation and experiment that the filter scheme has significant suppression effect on supraharmonics and good dynamic performance, and the operating loss and output capacity of the active part are significantly reduced.

engineering, electrical & electronic
Conductive Emi Analysis And Suppression In An Active Power Filter

W Lei,Z Fang,Y Wang,Jj Liu,X Zhai,Lh Wu,Za Wang

DOI: https://doi.org/10.1109/pesc.2005.1581644

2005-01-01

Abstract:Active power filter (APF) is one of major power quality controllers to deal with harmonics issues. It can compensate the low frequency harmonic components in power system by using PWM method. But, being a kind of switching power converter, APF will generate electromagnetic noise in high band. In this paper, the mechanism and path of two kinds of noise are analyzed and an EAU filter is designed to decrease the EMI noise.For APF, whose output current frequency may over 1250Hz (for compensate 25th order harmonic component in 50Hz system), EMI filter may deteriorate its compensation performance. The Multi-modular approach has been applied in the paper to achieve high equivalent switching frequency and reduce the switching ripple.
Research on Active Power Filter Based on Wavelet Transform

WANG Zhi-liang,WANG Yong,ZI Zhen-ning,HUANG Jie

DOI: https://doi.org/10.3969/j.issn.1000-100X.2012.09.016

2012-01-01

Abstract:Active power filter(APF) is the main device to suppress the harmonic in the power system.Harmonic current detection fast and accuracy determine the performance of the system harmonic current compensation in the APF system.Based on the analysis of traditional detection algorithm,the wavelet transform harmonic current detection method is used,meanwhile,the method is studied in the EMTDC/PSCAD and a prototype is built.The experimental results verify the feasibility of the method,and it has good dynamic response speed.
A Series Active Power Filter Adopting Hybrid Control Approach

ZA Wang,Q Wang,WZ Yao,JJ Liu

DOI: https://doi.org/10.1109/63.923761

IF: 5.967

2001-01-01

IEEE Transactions on Power Electronics

Abstract:The series active power filter (APF) is suitable for compensating voltage type harmonics-producing load, whereas the control approach it adopts may directly influence its compensation characteristics. This paper first discusses the control approach of detecting source current in terms of the basic operation principle of a series APF, then developing a control approach of detecting load voltage. On the basis of these, a hybrid control approach is proposed. In this approach, the reference signal of the compensation voltage needed by the series APF is obtained by detecting both source current and load voltage. Thus, this approach has the advantages of the first and the second control approaches and at the same time, it can overcome their respective drawbacks. For practical realization, the control methods of PWM inverter in the series APF and for regulating its de side voltage are discussed in detail. A prototype of the series APF is manufactured and corresponding experiment investigation is done. The results show that when the series APF, if adopting the hybrid control approach instead of the other two, compensates for the voltage type harmonics-producing load, its performance can be improved greatly.
A Discrete Frequency Tuning Active Filter for Power System Harmonics

Tzung-Lin Lee,Jian-Cheng Li,Po-Tai Cheng

DOI: https://doi.org/10.1109/tpel.2009.2013863

2008-01-01

Abstract:Severe voltage distortion due to power system harmonic resonance has been reported in recent years. The termination installation active filter was presented to resolve this problem. It operates as similar conductance for all harmonic frequencies whether in a fixed conductance command or in an automatic gain adjustment control. Therefore, its filtering capability is impeded by mismatching between the active filter and the radial line, and the voltage distortion may still be significant throughout the line. Distributed installation of active filters presented previously can address this issue effectively, but the practical application is limited due to their cost-ineffectiveness. This paper proposes a discrete frequency tuning active filter to suppress power system harmonics. The active filter operates as various conductance for individual harmonic frequency. Each harmonic conductance is dynamically adjusted according to the corresponding voltage distortion of the active filter installation point in response to increase or decrease of nonlinear loads, or variation of resonant frequency in the power system. The mismatching problem between the feeder and the active filter can be avoided effectively. Therefore, harmonic voltage distortion can be maintained at an allowable level throughout the feeder with lower peak current and lower rms current consumption, and various loads installed in the power system receive more uniform voltage waveform. Operation principles are explained in detail, and computer simulations and experimental results validate the effectiveness of the proposed approach.
Design and Application of Transformerless Shunt Hybrid Active Power Filter

WU Jian,HE Na,XU Dian-guo

DOI: https://doi.org/10.3321/j.issn:0258-8013.2008.12.015

2008-01-01

Abstract:Active power filter (APF) and passive filter (PF) combining to hybrid active power filter (HAPF) is the trend, which make up the inherent shortcomings of passive filtering devices and can make good use of the advantages of active power filters. This article makes researches on design of hybrid parallel active power filter, presents the detailed design method and the relation between inductor and dc-voltage. Meanwhile, this paper purposes two kinds of control strategies of HAPF for compensation current harmonic and damping voltage harmonic propagation, analyses its filtering and damping performance in detailed. In addition, generalized integrator is introduced to the control to improve the performance of HAPF. The experimental results validate that the hybrid active power filter has outstanding performance.
The Application of Mixed Active Power Filter in Harmonics Restraining of Mine

Zhaohui Tang

2007-01-01

Abstract:This paper analyses the suitable harmonic restraining scheme in mine simply,describes the system structure and working principle of the mixed active power filter.Then a example that using mixed active power filter restrains harmonics in Fankou mine is provided.Actual work results indicate that the sort of mixed active power filter system has good restraining effect.

Application of Active Power Filter in Harmonic-Suppression

Analysis of a Novel Hybrid Series Active Power Filter Topology

Status quo of active power filter technology

A Hybrid Solution To Active Power Filter For The Purpose Of Harmonic Suppression And Resonance Damping

Harmonics suppression techniques

Active Power Filter for Harmonie Compensation Using a Digital Dual-Mode-structure Repetitive Control Approach

Power Quality Enhancement Using a Novel Hybrid Active Power Filter Device under Nonlinear Loads

General principle of active power filter and its application

APPLICATION OF ACTIVE POWER FILTER IN DECREASING HARMONICS IN PHASE-CONTROLLED POWER SOURCE

A Novel Active Power Filter for High Voltage Application

Study on a novel hybrid active power filter

Lecture on Electrical Energy Quality Ⅵ. Power Harmonic Filter

New Hybrid Active Power Filter with Low Additive Reactive Current Injection

Analysis and Suppression of Conductive EMI Originated by an Active Power Filter

Design of Hybrid Power Filters for Supraharmonics Suppression in Power Electronics Dominated Power Systems

Conductive Emi Analysis And Suppression In An Active Power Filter

Research on Active Power Filter Based on Wavelet Transform

A Series Active Power Filter Adopting Hybrid Control Approach

A Discrete Frequency Tuning Active Filter for Power System Harmonics

Design and Application of Transformerless Shunt Hybrid Active Power Filter

The Application of Mixed Active Power Filter in Harmonics Restraining of Mine