Abstract:Dissolution of uranium dioxide by molten zircaloy at high temperatures is an important chemical process affecting the fuel melting during nuclear reactor severe accidents. In this study, the dissolution model, based on the mass transfer model and the dissolution criteria, was developed and incorporated into the Moving Particle Semi-implicit (MPS) method. To verify the dissolution model, the one-dimensional mass transfer between two semi-infinite materials was simulated by the improved MPS code. The sensitivity analyses of the particle size have been conducted since particle size determines the simulation accuracy. Then analyses on dissolution of UO2 by molten zircaloy were performed according to results by the improved MPS code. In this study, two series of experiments on dissolution of UO2 by molten zircaloy conducted by Kim and Olander were simulated respectively. The first series of experiments focuses on mass transfer. The corresponding simulation results of MPS show that the dissolution kinetics of UO2 by molten zircaloy follows the parabolic law, and the penetration depths of chemical elements (U, O, Zr) were limited by time. The second series of experiments concerns on natural convection. The simulation results show that the natural convection of melting process has a significant influence on the dissolution behavior. The results indicate that the dissolution of UO2 by molten zircaloy fits the parabolic law before the concentration of UO2 in the liquid reaches the saturation point. After the concentration of UO2 reaches the saturation point, the dissolution of UO2 by molten zircaloy also obeys the parabolic law. The difference between the two parabolic laws is the dissolution rate. The dissolution rate decreases after the UO2 is saturated in the liquid. For natural convection, the penetration depths of chemical elements (U and O) become deeper, which could accelerate the progress of dissolution.

Diameter Deviation Calculation for UO2 Kernel by Sol–gel Process

Manufacture of UO2 Kernel by Gel-Casting Method

Analysis of Precipitation in Broth Preparation and Size Control of Liquid Microspheres in UO_2 Kernels Production by External Gelation Process

Hydromechanics Calculation for Micro Sphere UO2 Fuel Producted by Sol-Gelation Method

Determination of Air Section Length in Preparation of UO2 Ceramic Microspheres by Gelation Process

Preparing Uo2 Kernels by Gelcasting

Modeling of Air Region Height in the Casting Process for Preparing Uo2 Kernels

Study on Large Grain Sizes of HTGR's UO2 Fuel Kernels

Modeling the Irradiation Swelling of UO2 at the Fuel Pellet Rim

Simulation Study of UO2 Kernel Reduction Furnace Design

Impact of High Porosity on Thermal Transport in UO_2 Nuclear Fuel

F211 Formulation of high-precision volume-of-fluid method establishing appropriate balance between pressure and surface tension and its application to gas entrainment phenomena in fast breeder reactors

Total gelation process for the preparation of UO2 fuel kernels and its progress

The Uranium Recovery from UO2 Kernel Production Effluent

U3O8 Acid-Deficient Dissolution Process for Preparation of UO2 Kernels by Sol-Gel Method

Large-scale production of UO2 kernels by sol–gel process at INET

DEM Simulation for Separating Coated Fuel Particles by Inclined Vibrating Plate

Aging, Washing and Drying Processes of UO2 Gelled Spheres

Engineering Problems of EGU Process for HTGR Gel Microspheres

Preparation of Uo2 Kernel for Htr-10 Fuel Element

Numerical Analysis of the Dissolution of Uranium Dioxide by Molten Zircaloy Using Mps Method