Abstract:Suspension plasma spray is a promising technology for surface coatings. In this work, a comprehensive numerical model was developed to investigate the multiphase flow of suspension droplets and nanoparticles in direct-current (DC) plasma spraying. A three-dimensional computational model was developed to describe the plasma jet flow fields coupled with the axial injection of suspension droplets in which the zirconia micro- and nanoparticles were dispersed. The suspension droplets were tracked using Lagrangian coordinates, considering particle heating, melting, and evaporation. After evaporation of the solvent surrounding the particle, the nanoparticles were discharged into the plasma flow. In addition to the viscous force exerted by the flow on the micrometer-sized particles, the Brownian force and the Saffman lift force were taken into account. The effects of the noncontinuum on particle momentum transfer and evaporation on heat transfer were also considered. The numerical predictions of gas flow temperature were compared with experimental data and numerical data obtained with a different computational fluid dynamics code. The agreement was reasonable. The trajectories, velocity, and temperature of nanoparticles were calculated, and compared with those of microparticles. The results showed that the Brownian force plays a major role in acceleration and heating of nanoparticles. Compared with the conventional plasma spray process with micrometer-sized feedstock, the nanoparticles in suspension plasma spraying were found to have a wider spatial distribution and higher temperature. The effects of operating parameters, such as the power input to the plasma gas and plasma gas composition, on the gas velocity and temperature were investigated. The parameters that have a significant effect on the heat and momentum transfer to the particles injected in the plasma jet were identified.

Modeling of Air Region Height in the Casting Process for Preparing Uo2 Kernels

Diameter Deviation Calculation for UO2 Kernel by Sol–gel Process

Determination of Air Section Length in Preparation of UO2 Ceramic Microspheres by Gelation Process

Preparing Uo2 Kernels by Gelcasting

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Optimization of the Uo2 Kernel Coating Process by 2d Simulation of Spouted Bed Dynamics in the Coater

Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma Spray

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Drop Diameters During Urea Prilling

Formation of Aluminum Nanoparticles upon Condensation from Vapor Phase for Energetic Applications

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

Modeling for Formation of Microdroplets Prepared by Pulsated Orifice Ejection Method

A New Porous Nozzle for Aluminum Melts Purification—Preparation and Mathematical–Physical Model

Interaction between high-velocity gas and liquid in gas atomization revealed by a new coupled simulation model

Modeling Ablation Casting

A Unified Analytical Model for the Flight Distance of Flying Microdroplet Before Solidification

Numerical Modeling of In-Flight Molten Metal Droplet Dynamics and Particle Oxidation in Atmospheric Plasma Spraying

Manufacture of UO2 Kernel by Gel-Casting Method

Analysis of Precipitation in Broth Preparation and Size Control of Liquid Microspheres in UO_2 Kernels Production by External Gelation Process

Optimization of investment casting process for K477 superalloy aero-engine turbine nozzle by simulation and experiment

Physical model and mathematical analyses on thermal process of spray-deposited ZA27 alloy droplets