Abstract:The extraction of uranium (U)-related minerals from raw ore sands via a leaching procedure would produce enormous amounts of tailings, not only causing radioactivity contamination to surroundings but also wasting the potential U utilization. Effective recycling of U from U tailings is propitious to the current issues in U mining industries. In this study, the influence of the composite oxidation of Fe(III) and Mn(VII) intensified by microwave (MW) irradiation on the acid leaching of U from tailings was comprehensively explored in sequential and coupling systems. The U leaching activities from the tailing specimens were explicitly enhanced by MW irradiation. The composite oxidation caused by Fe(III) and Mn(VII) further facilitated the leaching of U ions from the tailing under MW irradiation in two systems. Maximum leaching efficiencies of 84.61, 80.56, and 92.95% for U ions were achieved in the Fe(III)-, Mn(VII)-, and Fe(III)-Mn(VII)-participated coupling systems, respectively. The inappropriateness of the shrinking core model (SCM) demonstrated by the linear fittings and analysis of variance (ANOVA) for the two systems explained a reverse increase of solid cores in the later stage of leaching experiments. The internal migration of oxidant ions into the particle cores enhanced by MW accelerated the dissolution of Al, Fe, and Mn constituents under acidic conditions, which further strengthened U extraction from tailing specimens.

The Uranium Recovery from UO2 Kernel Production Effluent

Recycling of Uranium in Process of Preparation UO2 Kernels by Sol-Gel Method

Treatment of UO2 Pellets Used for Preparing Fuel Elements of HTR-10 Followed by Supercritical Fluid Extraction

Treatment of Reactive Process Wastewater With High-Level Ammonia by Blow-off Method

Uranium elimination and recovery from wastewater with ligand chelation-enhanced electrocoagulation

The conceptual flowsheet of effluent treatment during preparing spherical fuel elements of HTR

The reprocessing of reactor core materials

Preparation of Ammonium Diuranate Particles by External Gelation Process of Uranium in INET

Wet Process of External Gelation of Uranium for Preparation of Uranium Dioxide Kernel of High Temperature Gas-cooled Reactors

Conversion of Ceramic Uo2 Pellets for Htr-10 Fuel Elements into Nitrate with N2o4

Uranium extraction from TRISO-coated fuel particles using supercritical CO2 containing tri-n-butyl phosphate

Large-scale production of UO2 kernels by sol–gel process at INET

U3O8 Acid-Deficient Dissolution Process for Preparation of UO2 Kernels by Sol-Gel Method

Achieving Efficient Uranium Extraction by in Situ Ultrasonic Texturization of Commercial Fe Powder

Efficient three-step strategy for reduction recovery of high purity uranium oxide from nuclear wastewater

Analysis of Precipitation in Broth Preparation and Size Control of Liquid Microspheres in UO_2 Kernels Production by External Gelation Process

Nitrate Conversion and Supercritical Fluid Extraction of Uo2-Ceo2 Solid Solution Prepared by an Electrolytic Reduction-Coprecipitation Method

New Process for Uranium Recovery from Effluents Coming from Ammonia Evaporation

Manufacture of UO2 Kernel by Gel-Casting Method

Enhancement of Uranium Recycling from Tailings Caused by the Microwave Irradiation-Induced Composite Oxidation of the Fe-Mn Binary System.

A non-polluting method for rapidly purifying uranium-containing wastewater and efficiently recovering uranium through electrochemical mineralization and oxidative roasting