Abstract:Deposits, derived primarily from the fuel but with some contribution from the oil are formed inside the combustion chamber of a spark-ignition engine with use. The growth of combustion chamber deposits (CCD) is a dynamic and, to an extent, reversible process which at any given time reflects the balance between the formation and removal processes. Engine surface temperature is the most important parameter that affects their formation and changes in engine operation which tend to increase surface temperature, reduce deposit growth. At a fixed temperature, less volatile fuels tend to form more deposits than more volatile fuels. Some detergent additive packages tend to increase CCD levels. CCD reduce the heat lost to the coolant and increase charge temperature thereby increasing flame propagation rates but reducing volumetric efficiency; they might also affect the final phase of combustion by as yet undefined chemical means. This is reflected as an increase in octane requirement and NOx and a reduction in maximum power but an improvement in fuel economy and a reduction in CO2 emissions. They might also lead to higher HC emissions but not necessarily always since there might be competing mechanisms which come into play. CCD effect on CO emissions is not clearly established. They can also cause other interference problems like carbon rap. It is not known to what extent engine performance is affected by small changes in CCD levels. There is a large variation in deposit growth and its response to changes in fuel, additives and engine operating conditions across the combustion chamber and between different engines. Similarly, the performance of different engines will be affected to different extents by the deposits. While assessing the effects of different fuels or additives on engine performance and emissions through their effects on CCD, the simultaneous effects on other aspects such as inlet valve deposits which might have their own effects on engine operation, should also be considered. The paper reviews the literature on these topics.

Prediction And Experimental Study On Hydrocarbon Emissions From Combustion Chamber Deposits In A Spark Ignition Engine

Effect of combustion chamber deposits on hydrocarbon emissions in a spark ignition engine

Effect Of Piston Crevices On The Numerical Simulation Of A Heavy-Duty Diesel Engine Retrofitted To Natural-Gas Spark-Ignition Operation

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

An Investigation on Simulation Models and Reduction Methods of Unburned Hydrocarbon Emissions in Spark Ignition Engines

Investigation on unburned hydrocarbon emissions in spark ignition engine

Investigation into Hydrocarbon Emissions from Crevice and Oil Film During Cold Start and Idling Periods in A Spark Ignition Engine

A Review of Experimental Studies on Deposits in the Combustion Chambers of Internal Combustion Engines

Prediction of Pollutants Emissions and Performance of Direct Injection Diesel Engines with Quasi Dimensional Combustion Model

Three-Dimensional Computational Fluid Dynamics Modeling of the Combustion Process of a MAN L21/31 Marine Diesel Engine

Study on formation process of in-cylinder unburned hydrocarbons during cold start and idling periods in spark ignition engines

Effect of fuel composition on hydrocarbon emissions in spark ignition engine

Combustion Chamber Deposits in Spark-Ignition Engines: A Literature Review

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

A Study on the Effect of Injection Rate on Emission Characteristics in D.I. Diesel Engine by Multi-zone Model

Effect of Hydrogen Addition on Methane Hcci Engine Ignition Timing and Emissions Using A Multi-Zone Model

Simulation and Analysis of Hydrogen-fueled Engine Combustion

Effects of hydrogen enrichment on the combustion and emission characteristics of a turbulent jet ignited medium speed natural gas engine: A numerical study

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Experimental Study on the Effects of Hydrogen Injection Strategy on the Combustion and Emissions of a Hydrogen/Gasoline Dual Fuel SI Engine under Lean Burn Condition

Modeling and Experimental Study on Quasi-HCCI Combustion