Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Study Onoptimization of Flow Measurement Accuracy of of Drainage Straight Pipe

Optimization Choice of Drainage Points for Model Calibration

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Study on Numerical Simulation of Hydraulic Regime of Single Stack Drainage System

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Exploring Hydraulic Impacts of Downstream Water Levels on the Drainage Capacity of a Stormwater Pipe

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Efficient Numerical Approach for Simultaneous Calibration of Pipe Roughness Coefficients and Nodal Demands for Water Distribution Systems

Analysis of Condition of Ensuring High-Lift Siphon Drainage and Numerical Simulation of Choice of Optimum Diameter

Numerical Simulation of Transient Flow in Horizontal Drainage Systems

Improved Calculation Method for Siphon Drainage with Extended Horizontal Sections

AN OPTIMIZATION STUDY ON CAVITATION FLOW IN A STEAM TRAP VALVE

Computational Simulation of the Flow Induced by Water Leaks in Pipes

Research of Applicability of Several Turbulence Models in Numerical Simulation for Flow in Pipeline

Numerical Simulation of Inlet and Outlet Passages for Axial Flow Pump in Drainage Pump Station

APPLICATION OF DIFFERENT TURBULENT MODELS IN CALCULATION OF FLOW RESISTANCE IN PIPELINES AND COMPARISON THEREOF

Research on the Hydraulic Performance of Arc-based Trapezoidal Short-throat Flow Measurement Flume Based on VOF

A Three-Dimensional Numerical Method for Siphon Drainage Process Simulation

Study on Siphon Drainage Capacity of Slopes with Long-Horizontal Pipe Sections

Comparisonstudies on flow measurement methods for cylinder water hole in diesel engine

The Research of 1D / 3D Coupling Simulation on Pump and Pipe System