Abstract:Over the past twenty years, metal-organic frameworks (MOFs) have emerged as extensively developed porous class of materials and are increasingly recognized as promising candidates for membrane-based CO2 separation. This potential primarily stems from the ability to deliberately customize their structure and functionalities to enhance interactions with guest molecules. In this study, we explore the use of MOF-525, a porphyrin-based MOF, as a nanofiller in a mixed matrix membrane (MMM) composed of 6FDA-DAM (6FDA: 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride; DAM: 2,4,6-trimethyl-1,3-diaminobenzene) polymer for CO2/N2 and CO2/CH4 separations. This particular MOF is chosen because of the possibility to metalate its porphyrin ring to tailor the interaction between the CO2 molecule and the MOF framework. As a result, the CO2/N2 and CO2/CH4 separation performance of the MMM loaded with metalated MOF-525 can be significantly improved without the necessity to use a very high nanoparticle loading. When compared to the bare polymeric membrane and 2 wt% non-metalated MOF-525 MMM, around 20% improvement in the membrane permeability and selectivity can be observed for the 2 wt% metalated MOF-525 MMM. Further analysis on the gas transport property of the MMM showed that the improvement mainly results from the enhanced CO2 solubility in the MMMs and improved interaction between the metalated MOF-525 and the CO2 molecule. However, it is also found that 2 and 5 wt% are the optimum loading value, above which the interfacial defects between the MOF nanoparticles and the polymers caused by the particle agglomeration starts to appear and thus deteriorating the membrane performance. This is also confirmed through the molecular simulations where some overestimations from the Maxwell model on the membrane permeability is observed particularly at high particle loading, indicating the agglomeration and the build-up of non-selective voids. Despite this, we have successfully shown in this study the high efficacy and efficiency of using metalated porphyrin MOFs for CO2 separation in a MMM since only relatively low particle loading (around 2 wt%) is required to improve the membrane performance.

Solvent Resistant Nanofiltration (SRNF) Membranes Based on Metal-Organic Frameworks

Mixed-Matrix Membranes for Water Treatment: Materials, Synthesis and Properties

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Design of Mixed‐Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving

Bifunctionalized MOFs modified poly (aryl ether ketone sulfone) ultrafiltration membranes with high-efficient BSA separation and dye adsorption

Preparation of Metal–Organic Framework/Polyvinylidene Fluoride Mixed Matrix Membranes for Water Treatment

Ultra-high flux loose nanofiltration membrane based on metal organic framework (CAU-10-H)/P84 co-polyimide for dye/salt fractionation from industrial waste water

Cu(I/II) Metal-Organic Frameworks Incorporated Nanofiltration Membranes for Organic Solvent Separation

Frontier of Metal-Organic Framework Nanofillers for Pre-Eminent Membrane Distillation Applications

Polycrystalline Iron(III) metal-organic framework membranes for organic solvent nanofiltration with high permeance

Enhancing Nanofiltration Selectivity of Metal-Organic Framework Membranes via a Confined Interfacial Polymerization Strategy

Water-soluble MOF nanoparticles modified polyethersulfone membrane for improving flux and molecular retention

Impacts of Metal-Organic Frameworks on Structure and Performance of Polyamide Thin-Film Nanocomposite Membranes.

MOF-808/Polyamide Thin-Film Nanocomposite Membranes for Efficient Nanofiltration

Protein–polyphenol nanoassemblies modulated construction of zeolitic imidazole framework-67 based nanofiltration membrane for effective separation of dye/salt mixtures

Fabrication of Solvent-Resistant Nanofiltration Membrane via Interfacial Polymerization Based on Cellulose Acetate Membrane

Investigating the impact of metal ion variations in terephthalate metal–organic frameworks on the organic solvent nanofiltration performance of mixed matrix membranes

Freestanding Metal Organic Framework‐Based Multifunctional Membranes Fabricated via Pseudomorphic Replication toward Liquid‐ and Gas‐Hazards Abatement

Molecular sieving using metal-polymer coordination membranes in organic media

Highly permeable and acid-resistant nanofiltration membrane fabricated by in-situ interlaced stacking of COF and polysulfonamide films

Investigation of MOF-525 and post-metalated MOF-525 as nanofillers in mixed matrix membranes for CO2 separation