Design of Mixed‐Matrix MOF Membranes with Asymmetric Filler Density and Intrinsic MOF/Polymer Compatibility for Enhanced Molecular Sieving

Rifan Hardian,Jiangtao Jia,Alejandro Diaz‐Marquez,Supriyo Naskar,Dong Fan,Osama Shekhah,Guillaume Maurin,Mohamed Eddaoudi,Gyorgy Szekely
DOI: https://doi.org/10.1002/adma.202314206
IF: 29.4
2024-03-23
Advanced Materials
Abstract:The separation of high‐value‐added chemicals from organic solvents is of prime importance for many industries but it is associated with a large energy consumption penalty. Suitably, membrane‐based nanofiltration offers potential for a more energy‐efficient separation than the conventional energy‐intensive thermal processes. Conceivably, mixed‐matrix membranes (MMMs), encompassing metal–organic frameworks (MOFs) as fillers, are poised to promote selective separation via molecular sieving, synergistically combining polymers flexibility and fine‐tuned porosity of MOFs. Nevertheless, conventional direct mixing of MOFs with polymer solutions results in underutilization of the MOF fillers owing to their uniform cross‐sectional distribution. Therefore, in this work, we propose a multizoning technique for the formation of MMMs with an asymmetric‐filler density at the macroscale, in which the MOF fillers are distributed only on the surface of the membrane, and a seamless interface at the nanoscale. Our design strategy demonstrates five times higher MOF surface coverage, which results in a solvent permeance five times higher than that of conventional MMMs while maintaining high selectivity. Practically, MOFs are paired with polymers of similar chemical nature in order to enhance their adhesion without the need for additional surface modification. Our approach offers permanently accessible MOF porosity, which translates to effective molecular sieving, as exemplified by the polybenzimidazole and Zr–BI–fcu‐MOF system. Our findings pave the way for the development of composite materials with a seamless interface. This article is protected by copyright. All rights reserved
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to improve the performance of Mixed - Matrix Membranes (MMMs) in the separation of organic solvents. Specifically, the paper focuses on enhancing the molecular sieving effect by designing MMMs with asymmetric filler density and inherent metal - organic frameworks (MOFs)/polymer compatibility. Traditionally, directly mixing MOFs with a polymer solution to prepare MMMs will result in a uniform distribution of MOFs across the membrane cross - section, leading to low utilization of MOFs fillers. Therefore, the paper proposes a multi - zone technique to form MMMs with macroscopic asymmetric filler density and a seamless nanoscale interface, where MOFs fillers are only distributed on the membrane surface to achieve higher solvent permeability and selectivity. ### Main problems of the paper 1. **Improving MOFs utilization**: The traditional direct mixing method causes a large amount of MOFs fillers to aggregate inside the membrane rather than concentrate on the membrane surface, which limits their effectiveness in the separation process. The method proposed in the paper aims to maximize the utilization efficiency of MOFs by concentrating them on the membrane surface. 2. **Enhancing membrane selectivity and permeability**: By optimizing the distribution of MOFs, the paper hopes to simultaneously improve the solvent permeability and selectivity of the membrane. Specifically, the paper shows that MMMs prepared using the multi - zone technique have a solvent permeability five times higher than that of MMMs prepared by traditional methods while maintaining high selectivity. 3. **Improving the compatibility between MOFs and polymers**: To ensure a good bond between MOFs and polymers, the paper selects MOFs and polymers with similar chemical properties for pairing without the need for additional surface modification steps. For example, the pairing of polybenzimidazole (PBI) with zirconium - based MOFs (Zr - BI - fcu - MOF) has good inherent compatibility because both contain benzimidazole units. 4. **Improving the mechanical stability of the membrane**: The paper also explores the mechanical stability of MMMs prepared by the multi - zone technique under high - pressure conditions. The experimental results show that these membranes can maintain a linear increase in solvent flux under pressures up to 50 bar, indicating good mechanical stability. ### Summary The paper solves the problems existing in traditional MMMs preparation methods by proposing an innovative multi - zone technique, significantly improving the separation performance and mechanical stability of the membrane. This method provides a new approach for developing high - performance composite materials.