Abstract:The flux observer method is widely utilized as a sensorless control technique in which the stator or rotor flux of IPMSM can be measured with a closed-loop observer or an integrator. However, DC-offset (DCoff), the ramp signal, and harmonics are consistently present in the acquired rotor flux because of an unidentified starting value, errors in the integral computation's current detection, and the inverter's nonlinearity. The aforementioned interference signals will drastically reduce the sensorless control efficacy. This work introduces an enhanced flux estimator with a negative feedback loop and PI controller to overcome the DC drift problem resulting from a pure integrator and a low-pass filter. Moreover, an optimal design approach of flux estimator structures with a broad range of speeds for Interior permanent magnet synchronous motor (IPMSM) drives is proposed, which utilizes an integrated topology of the voltage and current models incorporating a DC-offset PI-correction loop, actual and estimated flux magnitude's correction error. The flux vector's initial inaccuracy is eliminated, together with the DCoff and drift in the acquisition channel. A phase-locked-loop state estimator is utilized to derive the speed and position from the actual and estimated flux. The effectiveness and superiority of the suggested approach were proven by simulation and experimental findings for the IPMSM drives, which displayed high dynamic performances over varying scenarios. This reliable approach, including sensorless control, is suitable for all AC motors with sinusoidal flux distributions over a wide speed range.

Method for Elimination of DC Offset and Steady State Error for Voltage Module Flux Observer

An Adaptive Observer Design for Sensorless Control of Induction Motors

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

An Improved Speed-Senorless Flux Observer Based on Voltage Model for Synchronous Reluctance Machines

Stability analysis and improvements for combined voltage and current mode flux observer of induction machine

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Flux observer with adaptive parameter based on dual third-order generalized integrator frequency-locked loop

Experimental Investigation of Improved DC-Offset Compensation Loop for Flux Estimator in IPMSM Position and Speed Sensorless Control Drives

A Rotor Flux Observer Based on Nonlinear Quadrature Double Compensation

A new integrator for voltage model flux estimation in a digital dtc system

A Novel Compensation Method Of Stator Flux Estimation In Low Speed Region

A Compensation Strategy of Flux Linkage Observer in SPMSM Sensorless Drives Based on Linear Extended State Observer

An in-phase filter-based flux observation strategy for sensorless control of PMSMs

Research on Flux Observers in Active Magnetic Bearings

Study of Improved Flux Observer and Speed Identification Based on PLL Controller

Switch point self-tuning method of combined flux observers in active magnetic bearings

Accurate Hybrid Flux Observation Based on Improved Voltage Model for Induction Motor

Improved flux linkage observer for position estimation of permanent magnet synchronous linear motor

Improved MOGIFO-Based Flux Observation Strategy for PMSM Sensorless Drives

Flux Observer Model for Sensorless Control of PM BLDC Motor with a Damper Cage

A Determining Method Of Flux Level For Deadbeat Flux Level Controlled Direct-Field-Oriented Induction-Motors Using Adaptive Flux Observer