Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Accurate Hybrid Flux Observation Based on Improved Voltage Model for Induction Motor

Practical Induction Motor Model with Consideration of Frequency Variation

An Improved Speed-Senorless Flux Observer Based on Voltage Model for Synchronous Reluctance Machines

Modeling and Simulation of Non-Linear Dynamic Process of the Induction Motor System with Fluctuating Potential Loads

An Adaptive Observer Design for Sensorless Control of Induction Motors

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Stability analysis and improvements for combined voltage and current mode flux observer of induction machine

Adaptive Rotor Flux Estimation and Parameter Identification for Induction Motor

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Combined Active Flux and High-Frequency Injection Methods for Sensorless Control of Synchronous Reluctance Machines

A Hybrid Sliding Mode Flux Observer for Induction Motor Drive

Improved Rotor Flux Estimation Based on Voltage Model for Sensorless Field-Oriented Controlled Induction Motor Drives

A Closed-Loop Voltage Model Observer for Sensorless Induction Motor Drives Based on the Orthogonality and Sliding-Mode Technique

An Improved Rotor Flux Estimation Model Based on Stator Voltages and Currents

Hybrid Active Flux Observer to Suppress Position Estimation Error for Sensorless IPMSM Drives

FLUX OBSERVER OF INDUCTION MOTOR BASED ON EXTENDED STATE OBSERVER

Online Decoupled Stator and Rotor Resistances Adaptation for Speed Sensorless Induction Motor Drives by a Time-Division Approach

An Improved Voltage Model Integral Algorithm of Induction Motors based on the Orthogonality between Back EMF and Flux

Full-order Flux Observer Based on Speed and Stator Resistance Adaptation for Induction Motor