Abstract:Molten gasification is considered as a promising technology for the processing and safe disposal of hazardous wastes. During this process, the organic components are completely converted while the hazardous materials are safely embedded in slag via the fusion-solidification-vitrification transformation. Ideally, the slag should be glassy with low viscosity to ensure the effective immobilization and steady discharge of hazardous materials. However, it is very difficult to predict the characteristics of slag using existing empirical equations or conventional mathematical methods, due to the complex non-linear relationship among the phase transformation, vitrification transition and chemical composition of slag. Equipped with a strong nonlinear mapping ability, an artificial neural network may be able to predict the properties of slags if a large amount of data is available for training. In this work, over 10,000 experimental data points were used to train and develop a slag classification model (glassy vs. non-glassy) based on a neural network. The optimal structure of the neural network was figured out and validated. The results suggest that the classification accuracy for the independent test samples reached 93.3%. Using 1 and 0 as model inputs to represent mildly reducing and inert atmospheres, a double hidden layer structure in the neural network enabled the accurate classification of slags under various atmospheres. Furthermore, the neural network for the prediction of glassy slag viscosity was optimized; it featured a double hidden layer structure. Under a mildly reducing atmosphere, the absolute error from the independent test data was generally within 4 Pa·s. By adding a gas atmosphere into the input of the neural network using a simple normalization method, a multi-atmosphere slag viscosity prediction model was developed. Said model is much more accurate than its counterpart that does not consider the effect of the atmosphere. In summary, the artificial neural network proved to be an effective approach to predicting the slag properties under different atmospheres. The data-driven models developed in this work are expected to facilitate the commercial deployment of molten gasification technology.

Applying neural network to optimize the melting point prediction of simulant solid waste ash

Application of improved EMD-Elman neural network to predict silicon content in hot metal

Mechanism of Na2O/CaO Ratio Affecting Ash Fusing Characteristics During Ash Deposition and Slagging in Municipal Solid Waste Incinerator

A prediction method of slagging behavior for pulverized coal by using test method of sedimendation furnace

Research on hot metal Si-content prediction based on LSTM-RNN

Predicting coal ash fusion temperature based on its chemical composition using ACO-BP neural network

ICA-SVM-Based Modeling for Predicting Silicon Content in Blast Furnace Hot Metal

Study on the Melting Characteristics of Slag from the Incinerator of Hazardous Wastes Containing Fluorine and Chlorine

Prediction of Slag Characteristics Based on Artificial Neural Network for Molten Gasification of Hazardous Wastes

Experimental Investigation of Slag Melting Points Influenced by Additional Chemical Components

A new method for evaluating the melting performance of the slag

Combining General Regression Neural Network and Genetic Algorithm to Optimize Ash Fusion Temperature

Effect of Fluorine and Chlorine on Slag Melting Characteristics: Experimental Study and Simulation by Neural Networks

Dynamic Compensation Model of BF Slag Homogenization Thermal Based on Advanced Deep Learning Algorithm

The research on measuring analysis and prediction of the nanoscale precipitated phase in steel

Experimental Research and Prediction Model on Viscosity of High FeO Content Slag

Discrimination method of biomass slagging tendency based on particle swarm optimization deep neural network (DNN)

Prediction of ash fusion temperatures of municipal solid waste incinerator ash based on support vector regression

A New Experimental and Numerical Simulation Method for Measuring Ash Slag Fluidity Using VOF Based on OpenFOAM

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Prediction of Sulfur Content during Steel Refining Process Based on Machine Learning Methods