Abstract:Viscosity is a physical property of fluids and shows resistance to flow. In metallurgical slag, it directly affects various parameters of a metallurgical process such as reaction rate, separation effect, etc. The estimation of viscosity by models during a production process is considered to be much more effective owing to the production fluctuations and complexities of the slag composition. Many viscosity models have been developed in the past, such as the structural model with a wide range of adaptability and complex calculation process and the empirical and semiempirical models with simple structure and a narrow range of adaptability. The present paper proposed a new method to calculate the structural parameter (NBO/T) ratio (the amount of nonbridging oxygen per tetrahedral-coordinated atom), based on which the relationship between the viscosity of molten slag and (NBO/T) ratio was investigated. First, the viscosity model was applied to SiO2–ΣMxO slags, with the model parameters obtained by fitting the viscosity data of pure oxide and SiO2–MxO binary slag, and the average deviations were in the range of 9%–18.5%. Then, the model was extended to calculate the viscosity of SiO2–Al2O3–ΣMxO, a multicomponent complex aluminosilicate system, and Al2O3 was split into acid and basic oxides. Then the oxides were used for calculating the (NBO/T) ratio and viscosity activation energy based on the amphoteric behavior of Al2O3 in SiO2–Al2O3–MxO ternary slag system. Using the parameters of a SiO2–MxO binary system, the model parameters of the Al2O3-containing slag system were obtained by fitting the viscosity data of the SiO2–Al2O3–MxO ternary slag system with average deviations between 10% and 25%. In addition, the viscosity of a multi-complex system (SiO2–Al2O3–CaO–MgO–FeO–Na2O–K2O–Li2O–BaO–SrO–MnO) and its subsystems were also calculated using the model proposed in this paper, and the average deviations is less than 25%, which shows relatively accurate prediction results. The present model is based on the analysis of a slag structure and processing of data by an empirical method. This method has a better prediction effect and wider application range compared with the traditional empirical model, and it uses a simpler calculation process compared with the structure model.

A New Experimental and Numerical Simulation Method for Measuring Ash Slag Fluidity Using VOF Based on OpenFOAM

Model of estimating viscosity based on slag structure in entrained flow gasifier

Structurally-based Viscosity Model for Multicomponent Slag Systems

Experimental Research and Prediction Model on Viscosity of High FeO Content Slag

An Experimental Study of Viscosity in FeO-SiO2-V2O3-TiO2 System

Experimental Study on Flow Properties of Coal Ash Slag Based on the Image Measurement Method

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

A modified method for calculating the viscosity of multicomponent slags based on Kriging interpolation

Numerical Investigation of Basic Oxygen Furnace Slag Modification with Gas Bottom-Blowing and SiO2 Modifier

Numerical simulation of solidification of boiler molten ash impinging on vertical wall based on Smoothed Particle Hydrodynamics method

Effect of FeO Content on Foaming and Viscosity Properties in FeO-CaO-SiO2-MgO-Al2O3 Slag System

Modelling of Fly Ash Viscous Deposition and Slagging Prediction of Biomass-fired Boiler

Modeling Viscosity of High Titania Slag

Experimental Investigation and Modeling of Cooling Processes of High Temperature Slags

Viscosity Temperature Properties from Molecular Dynamics Simulation: the Role of Calcium Oxide, Sodium Oxide and Ferrous Oxide

Fluid flow, slag entrainment, and composition evolution of slag inclusions during vacuum degassing refining

A unified model of slagging particle deposition behavior with thermophoresis and dynamic mesh based on OpenFOAM

Simulation of Ash Deposition in Different Furnace Temperature with a 2D Dynamic Mesh Model

Viscosity determination of the biomass slag in the SiO2-CaO-K2O system based on the bond distribution

Numerical Simulation of the Interaction Between Arc Plasma and Molten Slag in Electric Arc Furnace for High-Titania Slag Smelting

Numerical Analysis of Slag–Steel–Air Four-Phase Flow in Steel Continuous Casting Model Using CFD-DBM-VOF Model