Abstract:High-strength prestressing cables exposed to high temperature result in the prestress loss, potentially leading to failure and even collapse of prestressing structures. This paper experimentally investigates thermal expansion of 1860 MPa steel wires and prestress loss of 1860 MPa twisted wire strands and parallel wire strands at elevated temperatures initially. Strands are localised heated in prestress loss tests. Different highest temperatures and initial prestress levels are considered. The test results show that EC2 underestimates the thermal strain of 1860 MPa steel wire at more than 450 °C. Prestress loss of the prestressing strand increases as the temperature increases. Cable types have little influence on the final prestress loss ratio. The strand with higher initial prestress level results in less final prestress loss ratio at less than 400 °C. A series fitting formulas of thermal strain, thermal expansion coefficient and final prestress loss ratio of prestressing strands are proposed. In addition, the finite element model of prestressing strand at elevated temperatures is established and validated. The numerical analysis shows that the temperature of the strand in non-heated region is significant, and the stress of the strand rises and then fall during heating stage, due to the balance between thermal expansion and degradation of mechanical properties. Finally, the analytical model of the prestress loss of the strands at elevated temperatures is proposed. The effect of thermal expansion, degradation of the mechanical properties and high-temperature creep of the strand in the heated region and non-heated region is considered respectively. Simplified method is obtained for more efficient computation. The analytical results have great agreement with the test results. The application of analytical method on practical engineering is discussed, and improved calculation equation is proposed for large span cables exposed to localised fire.

Experimental Research on the Mechanical Properties of Prestressing Steel Wire (fptk=1770n/mm2, D = 5mm, Low Relaxation) at and after High Temperature

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

EXPERIMENTAL RESEARCH ON IMPACT BEHAVIOR OF CONCRETE-FILLED STEEL TUBE AT ELEVATED TEMPERATURES

Prestress loss of twisted wire strands and parallel wire strands at elevated temperatures

Post-fire mechanical properties of stainless steel cables

Behavior of High Strength Structural Steel at Elevated Temperatures

Elevated-temperature mechanical property and constitutive model of galvanized parallel wire strands

Experimental investigation of cold-formed steel material at elevated temperatures

Stress–strain curves for stainless steel at elevated temperatures

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Investigation into the Prestress Loss and Thermal Expansion Performance of Steel Cables at High Temperature

High-temperature mechanical properties and failure modes of UHSS wire for cable-supported bridge

Experimental investigation of the mechanical properties of carbon fiber-reinforced polymer (CFRP) tendons during and after exposure to elevated temperatures

Behaviour of constructional stainless steel at elevated temperatures

Study on the high temperature tensile properties of steel alloy H13

Experiment on mechanical properties of ferritic stainless steel after exposure to elevated temperatures

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Improved time-hardening creep model for investigation on behaviour of pre-tensioned steel strands subject to localised fire

Effect of Temperature on Material Properties of Carbon Fiber Reinforced Polymer (CFRP) Tendons: Experiments and Model Assessment