Abstract:High-strength prestressing cables exposed to high temperature result in the prestress loss, potentially leading to failure and even collapse of prestressing structures. This paper experimentally investigates thermal expansion of 1860 MPa steel wires and prestress loss of 1860 MPa twisted wire strands and parallel wire strands at elevated temperatures initially. Strands are localised heated in prestress loss tests. Different highest temperatures and initial prestress levels are considered. The test results show that EC2 underestimates the thermal strain of 1860 MPa steel wire at more than 450 °C. Prestress loss of the prestressing strand increases as the temperature increases. Cable types have little influence on the final prestress loss ratio. The strand with higher initial prestress level results in less final prestress loss ratio at less than 400 °C. A series fitting formulas of thermal strain, thermal expansion coefficient and final prestress loss ratio of prestressing strands are proposed. In addition, the finite element model of prestressing strand at elevated temperatures is established and validated. The numerical analysis shows that the temperature of the strand in non-heated region is significant, and the stress of the strand rises and then fall during heating stage, due to the balance between thermal expansion and degradation of mechanical properties. Finally, the analytical model of the prestress loss of the strands at elevated temperatures is proposed. The effect of thermal expansion, degradation of the mechanical properties and high-temperature creep of the strand in the heated region and non-heated region is considered respectively. Simplified method is obtained for more efficient computation. The analytical results have great agreement with the test results. The application of analytical method on practical engineering is discussed, and improved calculation equation is proposed for large span cables exposed to localised fire.

Elevated-temperature mechanical property and constitutive model of galvanized parallel wire strands

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

High-temperature mechanical properties and failure modes of UHSS wire for cable-supported bridge

Behavior of High Strength Structural Steel at Elevated Temperatures

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Prestress loss of twisted wire strands and parallel wire strands at elevated temperatures

Experimental investigation of cold-formed steel material at elevated temperatures

Mechanical properties and bonding strength of twisted wire strands at elevated temperatures

Mechanical properties of butt weldments made with E5515-G electrodes at high temperature

Mechanical Properties of Butt Weldments Made with Q345B Steel and E5015 Electrodes at Different Temperatures

Post-fire mechanical properties of stainless steel cables

High-Temperature Mechanical Properties of Artificially Simulated Corroded Q500MC Structural Steel

Surface Characteristics And Mechanical Properties Of High-Strength Steel Wires In Corrosive Conditions

Mechanical Performance of Artificially Rusted Q500MC Structural Steel Subjected to High Temperature

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

Numerical Analysis for Behavior of Stainless-Steel Web Cleat Connections at Elevated Temperatures

High-Temperature Deformation Characteristics and Constitutive Model of an Ultrahigh Strength Steel

Constitutive Model of High-Performance Bolts at Elevated Temperatures

Mechanical properties and microstructure of high-strength and high-ductility steel at elevated temperature

Corrosion Of High-Strength Steel Wires Under Tensile Stress