Abstract:How to improve the specific power density of the rechargeable lithium ion battery has recently become one of the most attractive topics of both scientific and industrial interests. The spinel LiMn2O4 is the most promising candidate as a cathode material because of its low cost and nontoxicity compared with commercial LiCoO2. Moreover, nanostructured electrodes have been widely investigated to satisfy such industrial needs. However, the high-temperature sintering process, which is necessary for high-performance cathode materials based on high-quality crystals, leads the large grain size and aggregation of the nanoparticles which gives poor lithium ion battery performance. So there is still a challenge to synthesize a high-quality single-crystal nanostructured electrode. Among all of the nanostructures, a single crystalline nanowire is the most attractive morphology because the nonwoven fabric morphology constructed by the single crystalline nanowire suppresses the aggregation and grain growth at high temperature, and the potential barrier among the nanosize grains can be ignored. However, the reported single crystalline nanowire is almost the metal oxide with an anisotropic crystal structure because the cubic crystal structure such as LiMn2O4 cannot easily grow in the one-dimentional direction. Here we synthesized high-quality single crystalline cubic spinel LiMn2O4 nanowires based on a novel reaction method using Na0.44MnO2 nanowires as a self-template. These single crystalline spinel LiMn2O4 nanowires show high thermal stability because the nanowire structure is maintained after heating to 800 degrees C for 12 h and excellent performance at high rate charge-discharge, such as 20 A/g, with both a relative flat charge-discharge plateau and excellent cycle stability.

Synthesis and Electrochemical Properties of LiMn2O4 Spinel Phase with Nanostructure

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis and Electrochemical Performance of LiNi0.5Mn1.5O4 Spinel Compound

Electrochemical Performance of Nanosized LiMn2O4 for Lithium-Ion Batteries

Novel Synthesis Process and Structural Characterization of Li–Mn–O Spinels

Electrochemical performance of LiMn2O4 synthesized from precursor Mn3O4

Synthesis And Electrochemical Performance Of Linixmn2-Xo4 Spinel As Cathode Material For Lithium Ion Batteries

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Synthesis of Highly Crystalline Spinel Limn2o4 by A Soft Chemical Route and Its Electrochemical Performance

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Evolution of Spinel LiMn 2 O 4 Single Crystal Morphology Induced by the Li 2 MnO 3 Phase during Sintering

Tuning the Nanoarea Interfacial Properties for the Improved Performance of Li-Rich Polycrystalline Li-Mn-O Spinel.

Synthesis of Single-Crystalline LiMn2O4 with Different Dimensional Nanostructures for Li-ion Batteries

Kinetic Control of the Li0.9Mn1.6Ni0.4O4 Spinel Structure with Enhanced Electrochemical Performance

Synthesis of Single Crystalline Spinel Limn2o4 Nanowires for A Lithium Ion Battery with High Power Density

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

LIMN2O4 SPINEL DIRECT SYNTHESIS AND LITHIUM ION SELECTIVE ADSORPTION

Studies on LiMnO spinel system (obtained from melt-impregnation method) as a cathode for 4 V lithium batteries Part II. Optimum spinel from γ-MnOOH

Spray-drying method to synthesis LiMn1.5Ni0.5O4 and its electrochemical characteristics as a cathode material

Synthesis of LiNi0.5Mn1.5O4 by Solid-State Reaction with Improved Electrochemical Performance