Abstract:The particle size and pore size of spherical mesoporous silica materials play significant roles in their application. However, relatively limited systematic research has been conducted on how preparation conditions influence these properties. In particular, the effects of some important factors have not been adequately studied, including reaction time, reaction temperature, and organic solvent type. In this work, octane and water were used as solvents, and tetraethyl orthosilicate was used as the silicon source to systematically study the effects of reaction time, reaction temperature, different organic solvents, octane/water mass ratio, styrene template concentration, and surfactant (cetyltrimethylammonium bromide, CTAB)/H2O mass ratio on the particle morphology, particle size, and pore size of silica. The results suggest that the above-mentioned neglected factors exert a substantial influence on both particle size and pore size. In the experimental temperature range, the pore diameter decreases and the particle size increases with increasing temperature. The maximum particle size and pore size are achieved after a reaction time of 3 h, and a further increase in reaction time leads to a smaller particle size and pore size. As the number of carbon atoms in the organic solvent decreases, the pore size also gradually increases. Styrene and organic solvents that dissolve in CTAB micelles are crucial factors in pore formation, while the aggregation of the swollen CTAB micelles influences the particle size. The changes in the pore structure stability and hydroxyl density of the synthesized samples in water were also studied. After undergoing water treatment at temperatures ranging from 20 to 60 °C for 72 h, both the pore structure and morphology remain relatively unchanged. When the temperature increases, the surface hydroxyl density exhibits a more pronounced increase in the presence of water. After water treatment for 5 h, the surface hydroxyl density reaches saturation.

Influence factors of hydrolysis and condensation of organic silicon oxygen alkyl

Kinetics of the Hydrolysis and Polycondensation of Alkoxysilanes

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Hydrolysis-condensation rate constants of 3-trimethoxysilyl propyl methacrylate

Study of Sol–gel Reaction of Organically Modified Alkoxysilanes. Part I: Investigation of Hydrolysis and Polycondensation of Phenylaminomethyl Triethoxysilane and Tetraethoxysilane

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 2: a Study of Molecular Dynamics Simulation

Preparation and Thermal Stability of Phosphorus Acrylic Latex Modified with Organic Silicon

Effect of the Organic Substituent of Organotrialkoxylsilane on the Structure and Surface Properties of Silsesquioxanes

Effects of synthesis conditions on particle size and pore size of spherical mesoporous silica

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Sol-gel process kinetics for Si(OEt)4

Preparation and Thermal Stability of Polyorganosiloxane Superhydrophobic Film by Sol-Gel Method

Effect of mole ratios of precursors on properties and structure of organic-inorganic films

Using Hydrolysis of Silicon Tetrachloride to Prepare Highly Dispersed Precipitated Nanosilica

Hydrolysis and Condensation of Tetraethyl Orthosilicate at the Air–Aqueous Interface: Implications for Silica Nanoparticle Formation

Preparation and Characterization of Allyl-containing Siloxane

Organosilicon Thin Films Deposited from Cyclic and Acyclic Precursors Using Water as an Oxidant

Study on Reaction of Hydrogen-containing Siloxane with Hydroxyl Compounds Catalyzed by Stannous Octoate

On the Role of Tin Catalysts in Step-Growth Polymerization Reactions

Effect and Role of Al Addition in the Direct Synthesis Reaction of Methylchlorosilane Monomer

Development of Organosilicon Adhesive with Low Decomposition and High Temperature Resistance