Abstract:The realization of the necessary energy-efficient technological solutions for the production of highly porous SiC-ceramic materials requires appropriate research. The results of developing energy-efficient one-step methods for the synthesis of porous SiC-based ceramics and studying the characteristics of the obtained ceramics are presented. The effect of the morphology of initial powders on the synthesized product is considered. Ultrafine silicon carbide powders of two types, identical in characteristic particle size, but quite different in the surface morphology, were used as fillers in the synthesis of experimental samples of porous ceramics. The first one was obtained by the traditional furnace method (SiC f ), the second one was synthesized by the technology of self-propagating high-temperature synthesis (SiC shs ). It is shown that the particle morphology of initial powder components determines the structural parameters and characteristics of synthesized porous ceramics. The pore space parameters (average pore size, specific surface area, equivalent hydraulic diameter, permeability, etc.) can vary significantly. Porous ceramic materials synthesized on the basis of SiC f have an open porosity of 47%, high liquid permeability (up to 2 mDarcy), overwhelming dominance of α-SiC phase, and a narrow pore distribution with an average pore size of about 1 μm. High open porosity (more than 58 %), highly developed nanostructured pore space surface with an area of more than 12 m 2 /g, and wider pore size distribution (average pore size — 140 nm) are observed in porous ceramic materials based on SiC shs . The obtained results can be used to improve energy-efficient synthesis technologies and methods for predicting the properties of highly porous SiC-based ceramic materials. This will make it possible to create highly porous SiC ceramics within a priory predicted limits of effective applicability for the processes of ultrafiltration or catalysis.

Research Progress of Porous Silicon Nitride Ceramics

Progress in Preparation and Properties of Porous Silicon Nitride Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

New Progress in the Preparation and Application of High Performance Silicon Nitride Ceramics

Recent Progress in Preparation and Application of Porous Ceramics

Progress in Research and Application of Gas-Pressure-Sintered Silicon Nitride Ceramics

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Preparation And Properties Of High Strength Porous Si3n4 Ceramics

Progress in the Applications and Fabrications of Porous Ceramics

Silicon Nitride :Preparation and Current Research on Growth Kinetics

Study of the effect of the morphology of initial powders on the structural and dimensional characteristics of SiC-based porous ceramic materials

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Preparation and properties of porous Si 3N 4/SiO 2/BN composite ceramics

Preparation and Properties of Porous Si<sub>3</sub>N<sub>4</sub>/SiO<sub>2</sub>/BN Composite Ceramics

INFLUENCE OF Al2O3 ON PREPARING POROUS SILICON NITRIDE BASED CERAMIC FROM RICE HUSK

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Advanced Fabrication Method and Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics

Simultaneous improvement in porosity and strength of porous β-Si3N4 ceramics by formation of ultrafine fibrous grains

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Morphology Design of Porous Si2N2O Ceramics via Silica Poly-Hollow Microspheres