Abstract:In the present study, combined experimental and numerical investigations were carried out to analyze the fluid flow dynamics and heat transfer of impinging jets in a corrugated double-wall structure for exhaust nozzle cooling operating at high temperatures. The sinusoidal wavy plate, with multi-jet holes positioned at its trough, served as the jet plate, creating a staggered configuration with respect to the effusion holes. The transient thermochromic liquid crystal (TLC) method was employed to determine the local distribution of the Nusslet number on the flat effusion plate in a wind tunnel at small Reynolds numbers (ranging from 450 to 2700 based on the jet hole diameter ( d )). In the numerical part of the study, the k-ω SST turbulence model verified with the TLC data was used to solve the RANS equations. The effects of jet-to-plate spacing ( H ave /d = 1.6–3.6), corrugated plate amplitude ( A/d = 0.2–0.8), effusion hole diameter ( d e /d = 0.6–1.5), and Reynolds numbers were examined in detail. Our results showed that the introduction of the corrugated structure in the jet plate altered the high-velocity region pattern within the jet hole, leading to a 16 %-81 % reduction in jet core length compared to the flat jet plate. At a relatively high wave amplitude ( A/d ≥ 0.5), the vortex structure underwent significant changes, inducing a higher level of turbulence kinetic energy in the near-wall region of the target chamber. This led to enhanced heat transfer near the stagnation and effusion hole regions compared to the flat double-wall cooling. The effusion hole diameter exerted a minimal effect on the overall Nusselt number of the corrugated double-wall cooling. At very low Reynolds numbers ( Re j 〈9 0 0), the flow and heat transfer characteristics in corrugated double-wall cooling resembled those observed in flat double-wall cooling.

Grooved Wall Effect on Forced Convective Heat Transfer in a Packed Channel Between Two Parallel Plates

Experiments on Fluid Flow and Heat Transfer in a Packed Channel Between Two Parallel Grooved Plates

STUDY ON IMPROVED PERFORMANCE OF PLATE HEAT EXCHANGER WITH PACKED BEADS AND MINI-LONGITUDINAL CHANNELS ON PLATE SURFACE

Experimental Research of Fluid Flow and Convection Heat Transfer in Plate Channels Filled with Glass or Metallic Particles

Experimental investigation of heat transfer in flat plates with rectangular microchannels

Boundary conditions and wall effect for forced convection heat transfer in sintered porous plate channels

Computational study of flow boiling heat transfer enhancement in Grooved Wall channels

Forced Convective Heat Transfer in a Porous Plate Channel

Laminar heat transfer of gas in microchannels between two parallel plates

Effect of surface structure on fluid flow and heat transfer in cold and hot wall nanochannels

Anomalous Heat Transfer Enhancement in Separated Flow over a Zigzag-Shaped Dense Package of Inclined Grooves in a Channel Wall at Different Temperature Boundary Conditions

Wall Heat Transfer Characteristic of Parallel-plate Channel Filled with Open-cell Metal Foams in Large Flow Velocity Range

Thermal Drag and Critical Heat Flux for Natural Convection of Air in Vertical Parallel Plates

Infrared Experiment on the Wall Temperature Distribution for a Particle Packed Channel with Constant Heat Flux

Numerical study on enhanced heat transfer and friction factor characteristics of helical bead-groove tube

Influence of corrugated jet plates on internal heat transfer and flow dynamics of double-wall cooling: experimental-numerical approach

Heat transfer enhancement for microchannel heat sink by strengthening fluids mixing with backward right-angled trapezoidal grooves in channel sidewalls

Fluid Flow and Conjugate Heat Transfer in a Channel with Inflow from a Porous Wall

Effect of Differentially Heated Square Channel Wall Surface Radiation on Combined Convection Heat Transfer

Forced Convection Heat Transfer in Plate Channels Filled with Packed Beds or Sintered Porous Media

Stratified liquid-liquid flow through microchannels with grooved walls