Abstract:Liquid-infused surfaces have recently gained prominence in engineering applications owing to their versatile characteristics such as self-cleaning, anti-fogging, drag reduction, and enhanced heat transfer. In this article, a numerical analysis of pressure-driven flow past a periodic array of rectangular transverse grooves infused with non-Newtonian immiscible lubricants is performed. The volume of fluid method is employed to capture the interface between primary and secondary fluids, and the power-law model is deployed to mimic the non-Newtonian lubricant. The drag reduction capability of the microchannel is examined for various parameters such as Reynolds number, liquid fraction, viscosity ratio, viscosity index, and contact angle. It is observed that the introduction of a non-Newtonian fluid (shear-thickening or shear-thinning) drastically modifies the interface velocity and hydrodynamic resistance. In particular, a shear-thinning lubricant enhances the slip length as the viscosity index (n) is reduced owing to the reduced viscosity at the interface. Note that, for a lubricant having n = 0.7, the percentage improvement in the slip length is 382% in comparison with a Newtonian counterpart having the same viscosity ratio, N = 0.1. Importantly, the introduction of a shear-thinning lubricant with a viscosity ratio N = 5, a liquid fraction of 0.8, and a behavior index n = 0.7 yielded a pressure drag reduction of 63.6% with respect to a classical no-slip channel and of 23% with reference to a microchannel with the Newtonian lubricant. Moreover, at high Reynolds numbers, Re→50, the drag mitigation is slightly lowered due to the primary vortex shift in the cavity. Furthermore, the effect of the interface contact angle (θc) is investigated, as θc drops from 90° (flat) to 45° (convex); the meniscus curvature is enhanced, and the effective slip length is reduced. These observations suggest that a shear-thinning lubricant-infused microchannel is a promising candidate for drag reduction in lab-on-chip applications.

Stratified liquid-liquid flow through microchannels with grooved walls

Nanoscale fluid flows in the vicinity of patterned surfaces

WATER-OIL FLOW IN SQUARE MICROCHANNELS WITH A CROSSED JUNCTION

Flow Boiling in Microchannels Enhanced by Parallel Microgrooves Fabricated on the Bottom Surfaces

Molecular dynamics simulation on flows in nano-ribbed and nano-grooved channels

Hydrodynamic drag reduction in ribbed microchannel with infused non-Newtonian lubricants

Numerical simulation of fluid flow and heat transfer in microchannels with patterns of hydrophobic/hydrophilic walls

Flow analysis for efficient design of wavy structured microchannel mixing devices

Electromagnetohydrodynamic flow through a periodically grooved channel

Incompressible LBGK Simulation of Flow Characteristics in a Micro-Channel with Patterned Superhydrophobic Surfaces

Analytical study of two-layered mixed electro-osmotic and pressure-driven flow and heat transfer in a microchannel with hydrodynamic slippage and asymmetric wall heating

Effect of surface peak-valley features on the fluid flow performance in rough contact interface

Experimental and theoretical investigation of a low-Reynolds-number flow through deformable shallow microchannels with ultra-low height-to-width aspect ratios

Micro/Nano-Scale Fluid Flows On Structured Surfaces

Effect of magnetic field and hydrodynamic slippage on electro-osmotic Brinkman flow through patterned zeta potential microchannel

Electromagnetohydrodynamic flow and thermal performance in a rotating rough surface microchannel

Mapping fluid structuration to flow enhancement in nanofluidic channels

Heat transfer, pressure drop and flow patterns of flow boiling on heterogeneous wetting surface in a vertical narrow microchannel

Liquid–liquid microflows and mass transfer performance in slit-like microchannels

Liquid Flow in Surface-Nanostructured Channels Studied by Molecular Dynamics Simulation.

Exploring fluid flow in microchannels with branching and variable constrictions