Cathodic deposition and characterization of tin oxide coatings on graphite for electrochemical supercapacitors

Mengqiang Wu,Liping Zhang,Dongmei Wang,Chao Xiao,Shuren Zhang
DOI: https://doi.org/10.1016/j.jpowsour.2007.09.062
IF: 9.2
2008-01-01
Journal of Power Sources
Abstract:Amorphous tin oxide (SnOx) was cathodically deposited onto graphite electrode in a bath containing 0.1M stannous chloride (SnCl2), 0.5M sodium nitrate (NaNO3), and 0.4M nitric acid (HNO3) in an aqueous solution of 50% (v/v) ethanol. The SnOx coatings grown on graphite were characterized as typical capacitive behaviors by cyclic voltammetry (CV), chronopotentiometric (CP) in 0.5M KCl. Specific capacitance (in milli-farad per square centimeter, Ca) changes linearly with the deposition charge up to 4.5Ccm−2, and a maximum of as high as 355mFcm−2 was obtained with the SnOx coating grown at around 5Ccm−2. For the SnOx coating deposited at 0.2Ccm−2, a maximum specific capacitance (in farad per gram, Cm) of 298 and 125Fg−1 was achieved from CVs at a scan rate of 10, and 200mVs−1, respectively. The value of Cm significantly gets lower from 265 to around 95Fg−1 when the deposition charge increases from 0.2 to around 6.0Ccm−2. The long cycle-life and stability of the SnOx coatings on graphite via the presented cathodic deposition were also demonstrated.
What problem does this paper attempt to address?