Abstract:Here, uniform thin nanosheets' film of mixed α- and β-Ni(OH)2 phases was cathodically electrodeposited onto nickel foam support and the fabricated electrode was utilized as binder-free electrode for supercapacitor applications. An additive-free aqueous electrolyte of 0.05 M nickel nitrate was used as the deposition bath, where the hydroxide film was prepared with only applying direct current of 10 mA/cm2 in a two-electrode system while a uniform electrical field was established through using two counter electrodes parallel to nickel foam cathode. The morphology, crystalline phase and also specific surface area of the deposited nickel hydroxide film onto Ni foam were analyzed using field-emission scanning electron (FE-SEM) and X-ray diffraction (XRD) techniques as well as BET and FT-IR spectroscopy. These analyses proved that a mixed alpha and beta phases of Ni(OH)2 with uniform nanosheets' morphology are grown onto the nickel foam cathode. The electrochemical investigations using CV, GCD and electrochemical impedance spectroscopy (EIS) manifested the designed electrode provides specific capacitance of 2143 F g−1 at a current density of 0.5 A g−1 with high rate capability of 65% by increasing the current density from 0.5 to 20 A g−1 as well as 90% and 74% cycling stability at the current densities of 5 and 15 A/g, respectively. The excellent electrochemical performance of the as-prepared electrode is ascribed to the simultaneous deposition of both α and β phases through using a facile electrochemical deposition method. The presence of α and β phases guarantees the high specific capacitance and high cycling stability of the prepared electrode, respectively.

Comparative studies of nickel oxide films on different substrates for electrochemical supercapacitors

Synthesis of the Graphene/Nickel Oxide Composite and Its Electrochemical Performance for Supercapacitors

Characterization of NiCo2 O4 as high-performance supercapacitor electrode materials

Electrochemical behavior of nickel oxide nanoelectrocatalyst in diverse electrolytic environments and its application as an effective electrode for supercapacitors

Sol–gel Synthesis of Nanoporous NiCo2O4 Thin Films on ITO Glass As High-Performance Supercapacitor Electrodes

Electrodeposition and characterization of ordered mesoporous cobalt hydroxide films on different substrates for supercapacitors

Synthesis and characterization of aerogel-like mesoporous nickel oxide for electrochemical supercapacitors

Controllable Synthesis of Porous Nickel–cobalt Oxide Nanosheets for Supercapacitors

Research on NiOx Supercapacitor

Facile morphology controlled synthesis of nanostructured Co3O4 films on nickel foam and their pseudocapacitive performance

Designing and simulating of NiO@Graphite asymmetric supercapacitor device using thermally optimized nickel oxide electrode

Solution growth of NiO nanosheets supported on Ni foam as high-performance electrodes for supercapacitors

One-pot Hydrothermal Synthesis of Reduced Graphene Oxide/ni(oh)2 Films on Nickel Foam for High Performance Supercapacitors

NiO/LaNiO3 Film Electrode with Binder-Free for High Performance Supercapacitor

Facile preparation of porous sheet-sheet hierarchical nanostructure NiO/Ni-Co-Mn-O x with enhanced specific capacity and cycling stability for high performance supercapacitors

Electrochemical Fabrication of a Porous Nanostructured Nickel Hydroxide Film Electrode with Superior Pseudocapacitive Performance

New cathode material of NiCo2Crx-OH (x=0, 1, 1.5, 2.0) and anode material of one-off chopsticks derived carbon for high performance supercapacitor

Electrochemical Performance of Nickel Oxide/Koh/Active Carbon Super-Capacitor

Simple deposition of mixed α, β-nickel hydroxide thin film onto nickel foam as high-performance supercapacitor electrode material

Optimization studies for nickel oxide/tin oxide (NiO/Xg SnO2, X: 0.5, 1) based heterostructured composites to design high-performance supercapacitor electrode

Synthesis of Mesoporous Nickel Oxide for Supercapacitor Application