Abstract:Highlights • Carbon nanomaterials were synthesized in situ using a facile alcohol flame. • Lower flame temperatures were achieved with increasing amounts of aqueous ammonia. • Soot particles had concentrically stacked carbon layers with a diameter of 45±5 nm. • Carbon nanotubes (CNTs) were grown via the root growth mechanism. • I G /I D ratios of CNOs (2.33) and CNTs (1.05) indicate good graphitic crystallization. This study aimed to investigate the in-situ synthesis of nanostructured carbon materials using alcohol flames generated by a Bunsen lamp burner and a catalytic Ni substrate, as opposed to the chemical vapor deposition method. Four different liquid fuels were utilized, including n-butanol, ethanol, n-butanol/aqueous ammonia, and ethanol/aqueous ammonia. The carbon growth, morphology, and structure caused by the parameters of sampling position, temperature distribution, and liquid fuel type were investigated using the diffusion flame produced by the atmospheric alcohol lamp burner. The results show that the additive aqueous ammonia affects not only the flame temperature but also the axial position of the highest temperature. When using n-butanol and portions of 10%, 20%, and 30% of aqueous ammonia mixed fuels, carbon nanotubes (CNTs), and carbon nano-onions (CNOs) are both observed; however, using ethanol and the portions of 10%, 20%, and 30% of aqueous ammonia mixed fuels, only CNTs are synthesized. Soot particles show concentrically stacked carbon layers with a diameter of around 45±5 nm. CNTs have no encapsulated Ni catalytic particles at the closed tip, showing the root growth mechanism and indicating differences from the top growth mechanism. In addition, graphene could be synthesized in pure n-butanol and n-butanol/ammonia flames, but not in pure ethanol and ethanol/ammonia flames. The I G /I D ratio values of the raw CNOs (2.33) and CNTs (1.05) are greater than 1, where I G /I D is the intensity ratio of Raman G -band and D -band peaks, indicating good crystallization of the graphite layer of these nanostructured carbon materials. Notably, flame synthesis via an alcohol Bunsen lamp burner simplifies operations saves resources, and improves conventional production, demonstrating a facile and efficient method.

Temperature and carbon source effects on methane–air flame synthesis of CNTs

Experimental Research on Synthesis of Multi-Walled Carbon Nanotubes by Methane-Air Controlled-Diffusing Flame

Experimental research on flame synthesis of carbon nanotubes and its growth mechanism analysis

EXPERIMENTAL RESEARCH ON SYNTHESIS OF CARBON NANOTUBES

In Situ Carbon Nanotube Synthesis by the Reduction of NiO/γ-Al2O3 Catalyst in Methane

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Synthesis of Single-Walled Carbon Nanotubes by Chemical Vapor Deposition of Methane in A Fluidized Bed Reactor: Temperature and Reaction Time Effects

The influence of ethanol on the growth and structure of carbon nanotubes

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth

A New Understanding of Carbon Nanotube Growth: Activation and Deactivation of a Catalyst

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Comparison study on carbon nanomaterial synthesis from methane and acetylene in DC arc plasma

Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition over Methane Reduced Ni Catalyst

Lattice Distortion in Co3O4/Mn3O4-Guided Synthesis via Carbon Nanotubes for Efficient Lean Methane Combustion

In situ flame-synthesis of nanostructured carbon materials via facile alcohol Bunsen burner

Catalytic methane decomposition on CNT-supported Fe-catalysts

Effect of catalysis on coal to nanotube in thermal plasma

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Effects of Carbon Nanotubes on the Sensitivities of Pyrotechnic Compositions

Synthesis of Thin-Walled Carbon Nanotubes from Methane by Changing the Ni/Mo Ratio in a Ni/Mo/MgO Catalyst

Synthesis of MWCNTs by chemical vapor deposition of methane using FeMo/MgO catalyst: role of hydrogen and kinetic study