Abstract:It is now almost twenty-five years since the first Erbium-Doped Fiber Amplifier (EDFA) was demonstrated. Currently, the EDFA is one of the most important elements widely used in different kinds of fiber-optic communication systems. However, driven by a constantly increasing demand, the network traffic, growing exponentially over decades, will lead to the overload of these systems (“capacity crunch”) because the operation of the EDFA is limited to a spectral region of 1530–1610 nm. It will require a search for new technologies and, in this respect, the development of optical amplifiers for new spectral regions can be a promising approach. Most of fiber-optic amplifiers are created using rare-earth-doped materials. As a result, wide bands in shorter (1150–1530 nm) and longer wavelength (1600–1750 nm) regions with respect to the gain band of Er-doped fibers are still uncovered. Here we report on the development of a novel fiber amplifier operating in a spectral region of 1640–1770 nm pumped by commercially available laser diodes at 1550 nm. This amplifier was realized using bismuth-doped high-germania silicate fibers fabricated by MCVD technique.

Erbium-doped Fiber Amplifier for Pump Wavelengths Between 780 and 840 Nm

Investigation Of Erbium-Doped Fiber Amplifier Pumped By Ti - Sapphire Tunable Laser At Wavelength Between 950-Nm And 1000-Nm

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Modeling Erbium–thulium-Co-doped Fiber Amplifier for 1400–1650 Nm Band

Gain performance and gain modulation of 980nm-pumped erbium-doped fibre amplifiers

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Pump Laser Automatic Signal Control for Erbium-Doped Fiber Amplifier Gain, Noise Figure, and Output Spectral Power

Design of broadband l-band erbium doped fiber amplifier

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

Gain-Enhanced Double-Pass Long-Wavelength-Band Erbium-Doped Fiber Amplifier Using Backward Pumping

Design optimization for efficient erbium-doped fiber amplifiers

219.6 W large-mode-area Er:Yb codoped fiber amplifier operating at 1600 nm pumped by 1018 nm fiber lasers

Numerical Simulation Of 980 Nm-Ld-Pumped Yb3+-Er3+-Tm3+-Codoped Fiber Amplifier For 1500nm And 1600nm Bands

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band

Influence of Multimode-Pump Propagation on the Gain Characteristics of Erbium–ytterbium Doped Waveguide Amplifier

Optimal design of Er/Yb co-doped fiber amplifiers with an Yb-band fiber Bragg grating

Novel Split-Band Erbium-Doped Fiber Amplifier

Toward an ultra-broadband emission source based on the bismuth and erbium co-doped optical fiber and a single 830nm laser diode pump.