Abstract:Based on the intramolecular energy transfer, relative gains of 10.5 and 8.5 dB cm−1 at 1535 and 1550 nm respectively are demonstrated in ErIII coordination polymer [Er(DBTTA)3(FDPO)]n‐doped waveguides under excitations of light‐emitting diode instead of laser pumping. This study is expected to achieve the application of polymer waveguide amplifiers in planar photonic integration and facilitate low‐cost packaging of the waveguide and pump sources. 9,9‐bis (diphenylphosphorylphenyl) fluorene (FDPO) and dibenzotetrathienoacene (DBTTA), are synthesized as the neutral and anionic ligands, respectively, to prepare the ErIII coordination polymer [Er(DBTTA)3(FDPO)]n. Based on the intramolecular energy transfer, optical gains at 1.5 μm are demonstrated in [Er(DBTTA)3(FDPO)]n‐doped polymer waveguides under excitations of low‐power light‐emitting diodes (LEDs) instead of laser pumping. A ligand‐sensitization scheme between organic ligands and Er3+ ions under an excitation of an ultraviolet (UV) LED is established. Relative gains of 10.5 and 8.5 dB cm−1 are achieved at 1.53 and 1.55 μm, respectively, on a 1‐cm‐long SU‐8 channel waveguide with a cross‐section of 2 × 3 μm2 and a 1.5‐μm‐thick [Er(DBTTA)3(FDPO)]n‐doped polymethylmethacrylate (PMMA) as upper cladding. The ErIII coordination polymer [Er(DBTTA)3(FDPO)]n can be conveniently integrated with various low‐loss inorganic waveguides to compensate for optical losses in the C‐band window. Moreover, by relying on the intramolecular energy transfer and UV LED top‐pumping technology, it is easy to achieve coupling packaging of erbium‐doped waveguide amplifiers (EDWAs) with pump sources in planar photonic integrated chips, effectively reducing the commercial costs.

Influence of Multimode-Pump Propagation on the Gain Characteristics of Erbium–ytterbium Doped Waveguide Amplifier

Gain Characteristics of Er~(3+)/Yb~(3+) Co-Doped Waveguide Amplifiers

A Numerical Method for Solving Gain Characteristics of Er3+/Yb3+ Codoped Waveguide Amplifiers

Influencing Factors on Erbium-Doped Polymer Waveguide Amplifier

On-chip Integrated Few-Mode Erbium–ytterbium Co-Doped Waveguide Amplifiers

Optimization of erbium-doped waveguide amplifier

Numerical analysis of amplification characteristic of erbium-doped waveguide amplifiers by FD-BPM

Ion-Exchanged Silica-On-Silicon Structured Channel Erbium-Doped Waveguide Amplifiers

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Design optimization for efficient erbium-doped fiber amplifiers

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

Effects of Pumped Styles on Power Conversion Efficiency and Gain Characteristics of Phosphate Glass Er3+–Yb3+-co-doped Waveguide Amplifiers

Formulized Analytical Technique for Gain Characteristics of Phosphate Glass Er3+/Yb3+ Co-Doped Waveguide Amplifiers

Design of a Few-Mode Erbium-Ytterbium Co-Doped Polymer Optical Waveguide Amplifier With Low Differential Modal Gain

Optical Amplification at 1.5 μm in ErIII Coordination Polymer‐Doped Waveguides Based on Intramolecular Energy Transfer

Numerical Analysis of Amplification Characteristics of ErxY2 − Xsio5

A Semi-Weakly Confined Erbium-Doped Waveguide Amplifier with Double-Layered Buffer/cladding.

On-Chip Waveguide Amplifiers for Multi-Band Optical Communications: A Review and Challenge

Gain performance and gain modulation of 980nm-pumped erbium-doped fibre amplifiers

Erbium-doped Fiber Amplifier for Pump Wavelengths Between 780 and 840 Nm

Study on Er3+-Yb3+ co-doped La2O3–Al2O3 glasses for C-band optical waveguide amplifier with high luminous efficiency and low pump threshold