Abstract:The compounding of waste EPDM from postindustrial scrap with polypropylene (PP) is a possible way to manufacture thermoplastic elastomers to solve a significant environmental problem. Accordingly, the present study considers the one-step (OS), two-step (TS), and dynamic revulcanization (DR) compounding methods for the manufacturing of PP/EPDM blends at different ratios of components with the aid of an ultrasonic twin-screw extruder (TSE) at various ultrasonic amplitudes. In the OS method, PP and waste EPDM particles were directly compounded using TSE with and without ultrasonic treatment. In the TS and DR methods, the waste EPDM particles were fed into the TSE and devulcanized without and with ultrasonic treatment. Then, in the TS method the devulcanized EPDM was compounded with PP using TSE without the imposition of ultrasound. In the DR method, the devulcanized EPDM after compounding with curatives was mixed with PP and dynamically revulcanized without the imposition of ultrasound in TSE. The die pressure during compounding was recorded and correlated with the rheological properties of compounds. The mechanical properties of the PP/EPDM blends obtained in the OS and TS methods did not show any improvement with ultrasonic treatment. In the DR method, all the PP/EPDM blends showed a significant increase in the tensile strength and elongation with ultrasonic amplitude and a slight decrease in the Young’s modulus. In particular, a tensile strength of 30 MPa and an elongation at break of 400% were achieved at an ultrasonic amplitude of 13 μm for the PP/EPDM blend at a ratio of 75/25. The complex viscosity, storage, and loss moduli of dynamically revulcanized PP/EPDM blends increased with the ultrasonic amplitude while the loss tangent decreased. At the same time, the results for the blends obtained by the OS and TS methods showed an opposite trend in the dynamic property behavior with the ultrasonic amplitude. Optical micrographs indicated that the blends obtained by the DR method at an ultrasonic treatment at 13 μm showed the lowest sizes of dispersed revulcanized EPDM particles in the PP matrix, leading to the excellent performance of these thermoplastic elastomers.

Structure and mechanical properties of SRP/HDPE/POE (EPR or EPDM) composites

Mechanical Properties of High‐density Polyethylene/scrap Rubber Powder Composites Modified with Ethylene–propylene–diene Terpolymer, Dicumyl Peroxide, and Silicone Oil

Modification of High-Density Polyethylene/Scrap Rubber Powder Composites

Morphology and Mechanical Properties of HDPE/SRP/elastomer Composites: Effect of Elastomer Polarity

Dao Dian Ju Yi Que - Dan Xing Ti Fu He Mo

DYNAMIC VULCANIZATION OF THE WASTE RUBBER POWDER/HDPE/POE THERMOPLASTIC ELASTOMERS

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Preparation and Properties of High Heat Resistance EPDM Composite

Effects of Compatibilizing Agent and in Situ Fibril on the Morphology, Interface and Mechanical Properties of EPDM/nylon Copolymer Blends

Effect of Epoxidized EPDM on Structure and Properties of PBT

Preparation and Properties of Peroxide Dynamically Vulcanized Poly(vinylidene Fluoride)/silicone Rubber/zinc Dimethacrylate Composites

Study of in-situ micro-fibre of DPDM/PA

Effects of difunctional reactive polyhedral oligomeric silsesquioxane on the properties of EPDM

PP/EPDM-based Dynamically Vulcanized Thermoplastic Olefin with Zinc Dimethacrylate: Preparation, Rheology, Morphology, Crystallization and Mechanical Properties

Manufacturing Polypropylene (pp)/waste EPDM Thermoplastic Elastomers Using Ultrasonically Aided Twin-Screw Extrusion

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Influence of Epoxidized Ethylene Propylene Diene Rubber on Nonisothermal Crystallization Kinetics and Mechanical Properties of Poly(butylene Terephthalate)/polypropylene Blend

Mechanical Properties and Microstructure of the HDPE/Al(OH)3/POE Composite