Abstract:A simultaneous methane (CH4) and carbon monoxide (CO) dual-gas sensor system for coal mine safety applications is highly desirable and yet challenging, from the perspective of complexity and cost. A single $2.3 \mu \text{m}$ distributed feedback (DFB) laser has been utilized in dual-gas sensor to solve the problems in cost and setup complexity. However, there is dual-gas cross-interference to be addressed in single-laser-based dual-gas sensor. To suppress the interference caused by absorption line overlapping, a novel two-step ( $2s$ ) second harmonic ( $2f$ ) algorithm based on polynomial fitting ( $2s$ - $2f$ -Polyfit) method was proposed for the single DFB laser-based near-infrared dual-gas sensor. A Herriott absorption gas cell was designed with a ~25 m optical path length. Numerical simulations and measurements were carried out to investigate the reported dual-gas cross-interference cancellation method. The signal-to-noise ratio (SNR) with the $2s$ - $2f$ -PolyFit algorithm was improved by ~53 dB compared to the scheme without the algorithm. The limit of detection (LoD) of CH4 was 0.97 parts per million in volume (ppmv) with a 0.4-s averaging time and it was further decreased to 62 parts per billion in volume (ppbv) with a 224-s averaging time. The CO measurement precision is 0.23 ppmv with a 0.4-s averaging time. With increasing averaging time, a measurement precision of 11 ppbv with a 212-s averaging time was obtained. Field experiments were carried out to evaluate the sensor performance for early fire detection and CH4 gas leakage monitoring. The reported novel $2s$ - $2f$ -PolyFit algorithm-based dual-gas sensor with no additional requirement on hardware shows enhanced selectivity and antiinterference ability compared to the infrared dual-gas sensor using a traditional sensing architecture with two lasers.

The Novel Multi-wavelength Infrared Sensor for Simultaneous Measurement of Dust and Gas Concentration

A novel IR multicomponent gas sensor

Near-infrared wide-range dual-gas sensor system for simultaneous detection of methane and carbon monoxide in coal mine environment

On-chip Long-Wave Infrared Gas Sensor Based on Subwavelength Grating Waveguide

Multi-point Spectroscopic Gas Sensing Based on Coherent FMCW Interferometry.

Study on the Multi-Channel Scanning Fiber-Optic Infrared Spectrum System for Measuring Gas Concentration

Development and performance detection of higher precision optical sensor for coal dust concentration measurement based on Mie scattering theory

Dual-Wavelength Optical Sensor for Measuring the Surface Area Concentration and the Volume Concentration of Aerosols

A temperature-compensated CO2 detection system based on non-dispersive infrared spectral technology

A Nondispersive Optical Gas Sensor with Time Division Multiplexing of Reference and Active Signals

A Robust Optical Sensor for Remote Multi-Species Detection Combining Frequency-Division Multiplexing and Normalized Wavelength Modulation Spectroscopy

Non-dispersive infrared multi-gas sensing via nanoantenna integrated narrowband detectors

Three-wavelength Optical Sensor for Measuring Distributed Mass Concentrations of Aerosols from Stationary Sources.

Multiband infrared inversion for low-concentration methane monitoring in a confined dust-polluted atmosphere

Broadband and High-Enhancement-factor Integrated Long-Wave Infrared Sensor Using the Photonic Crystal Assisted Subwavelength Grating Waveguide

A Non-Source Optical Fiber Sensor for Multi-Point Methane Detection

Simultaneous CH4/CO Measurement at Atmospheric Pressure Using a Single 2.3 Μm Laser and a Dual-Gas Cross-Interference Cancellation Algorithm

CH4/C2H6 dual gas sensing system using a single mid-infrared laser

A Novel Coal Mine Dust Measurement System and Experimental Analysis

A Gas Detection System Based on the Micro Light Splitting Principle

Integrated sensor based on acoustics-electricity-mechanics coupling effect for wireless passive gas detection