Abstract:Objective To evaluate the diagnostic accuracy and reliability for detection of coronary artery stenosis and restenosis in stent using 64 slice multidetector computed tomography angiography(MDCTA).Materials and Methods A pulsating cardiac phantom(GE China CT Lab) with three simulated coronary arteries was scanned on 64 slice MDCT(GE Light Speed VCT) at static state and 3 different sinus rhythms of 50、70、90 beats per minute(bpm).Two simulated arteries were 3 mm and 5 mm respectively in lumen diameter with stenoses of 25%、50%、75%.A stent with stenoses of 50%、75% was placed inside the another artery with 4 mm in lumen diameter.Images were analyzed on the GE AW4.2 workstation and the results were compared with those true dimensions of simulated arteries.Results(1) The average measured values of the 25%、50%、75% stenoses and luminal diameters for the 3 mm and 5 mm simulated arteries were(0.61±0.02) mm、(1.11±0.06) mm、(1.68±0.05) mm、(2.28±0.06) mm(P values of 0.001、0.001、0.000、0.000 with one sample t test) and(1.14±0.04) mm,(2.30±0.04)mm,(3.50±0.04) mm,(4.71±0.04) mm(P values of 0.010、0.003、0.001、0.001 with one sample t test) respectively;The average measured percentage values of the 25%、50%、75% stenoses were(26.8±0.6)%、(48.6±0.7)%、(73.8±0.9)%(P values of 0.009、0.145、0.075 with one sample t test) and(24.1±0.6)%、(48.9±0.8)%、(74.4±0.7)%(P values of 0.066、0.071、0.139 with one-sample t test).(2) The measured values of the 3 mm diameter simulated artery were more susceptible to high heart rate with artifact,especially when they were more than 70 bpm.(3) 64 slice VCT had a potential but limited capability to depict in stent restenosis due to the artifacts caused mainly by high density metal stent and motions at high heart rate;for the same reason the diameter of lumen at stent segment was less than that of normal segment,which was statistical significant.(4) Measurements revealed significantly better results on the gantry rotation time of 0.42 s compared to that of 0.35 s(P=0.036) at heart rate of 90 bpm.Conclusion 64 slices VCT is reliable in detecting coronary artery stenosis,it is limited to depict in stent restenosis,VCT is promising in the cases when vessel caliber is relatively large and heart rate is relatively low.Improving the spatial resolution through software kernels or hardware can increase the accuracy in measuring in stent restenosis.Making fully usage of matched scan parameters can also do much help to imaging quality.

Best Phase Technique Used in Coronary Artery Imaging with Dual-source CT

Optimal systolic and diastolic coronary artery imaging with Dual-source CT: comparison of automatic optimal phase selection technique and whole phase reconstruction

Retrospectively Electrocardiographically-Gated Reconstructed Multi-Slice Spiral CT Coronary Angiography:Optimal R-R Phase and Clinical Application

Coronary Angiography by 128 Multi-Slice Dual Source CT with Multiple Scan Modes

Coronary Artery Imaging in Patients with Sinus Tachycardia Using Dual-Source CT:Optimal Reconstruction Phase and the Effect of Heart Rate and Heart Rate Variability on Image Quality

The Effects of Whole-Phase Interval Reconstruction and Four Dimensional Mode on the Imaging Quality of Dual-Source CT Coronary Angiography:An Initial Study

Improved 4D cardiac functional assessment for pediatric patients using motion-weighted image reconstruction

Image Quality of Dual-Source CT Coronary Angiography at Different Heart Rate Level

Research progress of clinical application of dual source CT myocardial perfusion imaging

Automatic Vs Manual Coronary CT Angiography Reconstruction for Whole-Heart Coverage CT Scanner: a Comparison Study in General Patient Population.

Comparison of Reconstruction Methods in Multi-Slice CT Coronary Angiography

The Clinic and Study of Application with Various Heart Rate using Segment Image Reconstruction on 64-MDCT Coronary Angiography

Coronary Angiography with Dual-Source CT: the Effect of Average Heart Rate, Heart Rate Range, and Heart Rate Variability on Image Quality

Principal and Clinical Application of Dual-Source CT

Primary Searches of Technical Characteristics and General Process of Coronary Angiography by Dual-source Computer Tomography

Quality control and parameter optimization of coronary angiography with 64 multi-slice CT

Single- Versus Multi-Phase Acquisition Protocol for Prospective-Triggered Sequential Dual-Source CT Coronary Angiography: Comparison of Image Quality and Radiation Dose.

Dual arterial Phase acquisition Based on united Compressed Sensing Technology of MRI Provides Good Hepatic arteries display and optimal Late arterial Phase

Reproducibility of artificial intelligence–enabled plaque measurements between systolic and diastolic phases from coronary computed tomography angiography

The Experiment Study of Coronary Artery Imaging by 64 Slice Multidetector Computed Tomography Angiography with Pulsating Cardiac Phantom

Adaptive Cardio Sequence Prospective ECG-gated Dual-Source CT Coronary Artery Imaging: an Initial Investigation