Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Finite Element Simulation for Residual Stresses in Weling Process

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Finite element simulation of welding process and real-time monitoring assessment

Review on finite element analysis of welding deformation and residual stress

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Finite Element Analysis of Modeling Residual Stress Distribution in All-position Duplex Stainless Steel Welded Pipe

Residual Stresses Simulation for Friction Stir Welded Joint

Finite Element Analysis Model and Residual Stress Optimization in Rotor Welding Process

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

A physically consistent 2D residual stress model for approximating 3D effects in welding

Finite element and experiment analysis of welding residual stress in S355J2 steel considering the bainite transformation

Residual Stress Modeling of Narrow Gap Welded Joint of Aluminum Alloy by Cold Metal Transferring Procedure

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Finite Element Simulation of Multi-pass Welding Process with Rezoning Technique

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Finite Element Prediction of Residual Stress and Deformation Induced by Double-Pass TIG Welding of Al 2219 Plate

Three-dimensional finite element analysis on welding residual stresses of construction steel

Numerical Simulation of Welding for Residual Stress Prediction of Low Carbon Steel

Effect of Thermophysical Parameters on the Hump Feature of Welding Residual Stress by Finite Element Analysis

Prediction of Welding Deformation and Residual Stress in A Multiply-Stiffened Plate

Discussion and calculation on welding residual longitudinal stress and plastic strain by finite element method