Abstract:A magnetic field measurement with enhanced sensitivity based on the Vernier effect of a dual-loop optoelectronic oscillator (OEO) using a cascaded giant magnetostrictive material-fiber Bragg grating (GMM-FBG) and Monel-400-fiber Bragg grating (Monel-400-FBG) is proposed and experimentally demonstrated. The OEO loop incorporates two reflected signals from the dual FBGs, serving as separate light sources injected into two paths with distinct fiber lengths. The dispersion introduced in the loop allows the wavelength shift of the GMM-FBG to be translated into a frequency shift of the microwave signal within the OEO cavity. As the GMM-FBG's central wavelength shifts with the magnetic field variation, the change of the monitoring OEO frequency enables precise measurement of magnetic field information. Diverging from conventional single-loop configurations, the proposed OEO generates the Vernier effect due to the length disparity between the two loops. Consequently, by monitoring the frequency variations in the envelope of the OEO's micro-wave signal, the sensitivity scale factor for sensing information is significantly enhanced. Experimental findings reveal a magnetic field sensitivity of approximately 201 Hz/mT for the single loop, increasing to 8 kHz/mT with the application of the Vernier effect, which represents a 40-fold improvement. Furthermore, a Monel-400 alloy hosts the reference FBG, possessing a similar thermal expansion coefficient to GMM. This design mitigates temperature crosstalk in magnetic field measurements. Compared to utilizing an unprocessed reference FBG, the magnetic field error induced by temperature is reduced from 2.46 to 0.06 mT. Additionally, flexible sensitivity scale factors can be achieved by designing the varied path length differences. Experimental results demonstrate magnetic field sensitivities of 12.7 and 21.9 kHz/mT, with increases of 64 and 109 times, respectively.

Magneto-optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

A Novel Special Optical Fiber with Magneto-Optic Nonreciprocal Phase Shift under Transversely Applied Magnetic Field

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Research on sensitivity and dynamic range of magnetic field sensor based On magneto-optic fiber bragg grating

Characteristics of Magneto-Optic Fiber Bragg Gratings for Use in Optical Signal Processing

Optomechanical sensor network with fiber Bragg gratings

A highly sensitive magnetic field sensor based on FBG and magnetostrictive composite with oriented magnetic domains

Fiber Optic Fabry-Perot Magnetic Field Sensor with Temperature Compensation Using a Fiber Bragg Grating

Magnetic Field Sensor Using Cu-coated FBG-FP

Simultaneous Detection of Magnetic Field and Temperature Using Micro-Nanofiber Cascaded Fiber Bragg Grating Structure

Design of a Sensitivity-Enhanced Optical Fiber Magnetic Field Sensor Based on Magnetostrictive Composite

Magnetic field sensing via acoustic sensing fibers with submicron magnetostrictive cladding inclusions

Fiber Bragg grating sensor for magentic field measurement

Magnetic Fluid-Filled Optical Fiber Fabry–Pérot Sensor for Magnetic Field Measurement

Magnetic Field Measurement With Improved Scale Factor Based on a Dual-Loop Optoelectronic Oscillator With Vernier Effect Using a Cascaded GMM-FBG and Monel-400-FBG

Optical Fiber Magnetic Field Sensors Based on Magnetic Fluid: A Review

Temperature compensated magnetic field sensor based on magnetic fluid infiltrated cascaded structure of micro-tapered long-period fiber grating and fiber Bragg grating

Research Progress on Magneto-Refractive Magnetic Field Fiber Sensors

Fiber Magnetic Field Sensor With Extended Linear Measuring Range Based on Magneto-Shape Effect

Analysis of Polarization States in Magneto-Optic Fiber Bragg Gratings Based on a Nonmagnetic Equivalent Model

Magneto-Optic Fiber Gratings Useful for Dynamic Dispersion Management and Tunable Comb Filtering