Abstract:Perfobond connectors are commonly used to transfer the shear force with the transverse bar sheared off as the failuremode in steelconcrete composite structures. However, the perfobond connectors used to prevent the steel-concrete interface from separating in composite structures with load bearing steel bars that cannot be sheared off urgently need to be studied. Experimental and analytical studies were conducted to develop a novel thin-rib perfobond connector used in steel-concrete composite bridge towers. Based on the load characteristics of the Nanjing No. 5 Yangtze River Bridge tower, which is the first double-steel-plate concrete composite cable-stayed bridge tower in the world, the pull-out performance of the perfobond connectors in the large-scale composite tower were studied. Thin ribs were adopted in the connectors to avoid shearing off the longitudinal steel bars during the pull-out process. The coupling pull-out performance between adjacent perfobond connectors was investigated to demonstrate the performance differences between the multihole and the single-hole thin-rib perfobond connectors. The effects of the plate thickness, the distance from hole edge to rib bottom, the distance from hole edge to rib side, the hole diameter, the transverse bar diameter, and the transverse bar position in the connector hole were examined based on the experiments of 24 single-hole specimens and 24 trihole specimens. All stages of the load-displacement curves were calibrated, and the strain history of the steel parts was discussed. The main failure mode observed from the pull-out tests was steel plate fracture. Failure mechanism analysis showed that the position of the transverse bar in the hole affected the bearing capacity, stiffness, and ductility of the connector. Considering the effect of hole numbers, the hole-side part of a multihole thin-rib perfobond connector was relatively strengthened. An analytical model and calculation formulas to predict the pullout capacity of the thin-rib perfobond connectors were further established, and the proposed method was found to be in good agreementwith the experimental results, offering theoretical guidance for engineering practice. (c) 2019 American Society of Civil Engineers.

F152. Estimation of Shear Stress Distribution in the Vicinity of a Mechanical Heart Valve Prosthesis

Shear Mechanism of a Novel SFCBs-Reinforced Composite Shear Connector: Experimental, Theoretical Investigations and Numerical Model

Mechanical Behavior of Stud Shear Connectors Embedded in Hfrc

Shear Performance Study of Sleeved Stud Connectors in Continuous Composite Girder

Mechanical Behavior of Steel–HFRC Composite Girders

Feasibility and Performance of Novel Tapered Iron Bolt Shear Connectors in Demountable Composite Beams

Numerical analysis and design method of Y-shaped connectors encased in UHPC for prefabricated composite bridges

Shear connector performance analysis for composite bridge deck with corrugated steel sheeting

Experimental research and numerical analysis of shearing resistance in steel-concrete composite beam connectors

Numerical analysis of large stud shear connector embedded in HFRC

Shear behavior of stud and SFCBs‐reinforced PBL composite connectors in steel‐concrete structures

Shearing performances of the detachable prefabricated composite beams with different types of connectors

Experimental and Analytical Studies of Prestressed Concrete Girders with Corrugated Steel Webs

Cyclic shear test and stiffness study of a cross-section-type shear connector connection

Numerical Analysis for Push‐Out Test with Y Type Perfobond Shear Connectors

Experimental Study on an Innovative Shear Connector in Steel-UHPC Composite Structure

The Use of Shear Connectors for Enhancing the Performance of Steel–Concrete Composite Beams: Experimental and Numerical Assessment

Performance of Shear Connector in Composite Slab and Steel Beam with Reentrant and Open Trough Profiled Steel Sheeting

Experimental and Analytical Investigation on Pull-Out Performance of Multihole Thin-Rib Perfobond Connectors

Experimental Study on Shaped Steel Shear Connectors Used in Large-Scale Composite Structures

The Behavior of Post-installed Rebar Connectors in Steel Frame Retrofitted Concrete Structures Under Combined Shear and Tension