Static Behavior of Grouped Stud Shear Connectors in Steel–precast UHPC Composite Structures Containing Thin Full-Depth Slabs
Zhuangcheng Fang,Haozhen Fang,Junxing Huang,Haibo Jiang,Gongfa Chen
DOI: https://doi.org/10.1016/j.engstruct.2021.113484
IF: 5.582
2022-01-01
Engineering Structures
Abstract:Steel-precast concrete composite structures containing thin (less than 100 mm) full-depth ultra-high-performance concrete (UHPC) slabs offer numerous advantages, such as reduced on-site construction time, minimized traffic impact, and excellent structural performance and durability, making them suitable for accelerated bridge construction (ABC). However, few investigations have focused on the static analysis of grouped stud shear connectors in steel-precast UHPC composite structures. To this end, 18 push-out tests were conducted in this study with the variations in casting method (precast and monolithic), stud diameter (16, 19, 22, and 25 mm), slab thickness (50 and 75 mm), shear pocket geometry (rectangle- and inverted cone-shaped), and shear stud arrangement (4 studs in 2 rows and 9 studs in 3 rows). Given identical cover thickness in thin full-depth UHPC slabs (<= 100 mm), the test results indicated that both the stud diameter and slab thickness played a significant role in the structural performance. The slight reduction in strength and stiffness resulting from the different casting methods could be neglected. Additionally, adopting appropriate shear pocket geometry improved the shear behavior of connectors. Furthermore, the grouped stud effect should be considered because of the degradation in strength, stiffness, and ductility. Based on the test results, more accurate models considering the aforementioned effects were proposed for predicting the ultimate shear strength and load-slip relationship of grouped stud shear connectors in steel-precast UHPC composite structures containing thin full-depth slabs. Finally, several design recommendations on the aspect ratios and arrangements of studs were provided.