Abstract:The thermal stabilization process of polyacrylonitrile (PAN) precursor fiber was the key step to prepare high-performance carbon fiber. During the thermal stabilization process, the aggregation structure and the reactivity of molecular chains have significant effects on the microstructures and mechanical properties of carbon fiber. In the present paper, the effects of the orientation structure of PAN precursor fiber on the thermal stabilization reaction and the mechanical properties of carbon fiber were experimentally studied. Using multi-dimensional structural and mechanical properties tests, such as XRD, DSC, 13C NMR and Instron machine testing, the crystalline and skeleton structure, exothermic behavior, and tensile properties of PAN precursor fiber with different orientations in the process of thermal stabilization were characterized to reveal the relationship between microstructure evolution and tensile properties. The results showed that the orientation structure of PAN precursor fiber had an obvious effect on the thermal stabilization process and the tensile stress–strain characteristic. When the heat treatment temperature was lower than 200 °C, the crystallinity and crystallite size of PAN fibers with higher orientation degrees increased significantly. After sufficient thermal stabilization, the original PAN precursor fiber with a higher orientation degree could form more aromatic lamellar structures and showed better regularity. Furthermore, the yield strength and initial modulus of the fibers with a higher orientation degree increased due to the formation of more aromatic rings. The maximum increase in the percentages of yield strength and tensile modulus of the PAN fibers were achieved when the heat-treated temperature was 200 °C, and the percentage values were 138.4% and 158.7% compared to the precursor without heat-treatment. In addition, the elongation at break of the fibers with a higher orientation degree was also relatively larger.

Small angle X-ray scattering from voids within fibers during the stabilization and carbonization stages

Small furnace for the small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) characterization of the high temperature carbonization of coal

A comprehensive study on the effect of carbonization temperature on the physical and chemical properties of carbon fibers

Study on the structural evolution of polyacrylonitrile fibers in stepwise heat treatment process and its relationship with properties

Effect of amorphous carbon on the tensile behavior of polyacrylonitrile (PAN)-based carbon fibers

Effect of Polyacrylonitrile Precursor Orientation on the Structures and Properties of Thermally Stabilized Carbon Fiber

The effect of using two stabilization temperatures and fixation process on preparation of carbon nanofibers

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

Comparative investigation on the thermal degradation and stabilization of carbon fiber precursors

Fractal structure change of pitch-based carbon fiber during high-temperature heat treatment

Evolution mechanism of cyclized structure of PAN-based pre-oxidized fiber during low temperature carbonization process

Tailoring microstructures of carbon fiber reinforced carbon aerogel-like matrix composites by carbonization to modulate their mechanical properties and thermal conductivities

Solvated mesophase pitch-based carbon fibers: thermal-oxidative stabilization of the spun fiber

Stabilization time and temperature influence on the evolution of the properties of mesophase pitch stabilized fibers and carbon fibers

Chemical Structure Evolution and Mechanism During Pre-Carbonization of PAN-based Stabilized Fiber in the Temperature Range of 350–600 °C

Thermal Conductivity and Annealing Effect on Structure of Lignin-Based Microscale Carbon Fi Bers

Effect of Stretching on the Orientation Structure and Reaction Behavior of PAN Fiber During the Thermal Stabilization

Molecular Modeling of the Microstructure Evolution during the Carbonization of PAN-Based Carbon Fibers

Effects of carbonization temperature on structure and mechanical strength of electrospun carbon nanofibrous mats

Study of Microstructure Evolution and Mechanical Behaviour Changes of PAN-based Carbon Fibers after High-Temperature Heat Treatment (up to 2950 °C)

Remarkable Temperature Sensitivity of Partially Carbonized Carbon Fibers with Different Microstructures and Compositions