Abstract:Organic light-emitting devices (OLEDs) with a novel metal iridium complex of bis[2-(4-tert-butylphenyl)benzothiazolato-N,C-2'] iridium (acetylacetonate) [(t-bt)(2)Ir(acac)] doping into a carbazole-based material 4,4'-bis[N-1-napthyl-N-phenyl-amino] biphenyl (CBP) as light-emitting layer (ETL) were fabricated. The optimum doping concentration of (t-bt) 2Ir(acac) phosphor was 8 wt%. The maximum power efficiency (eta(p)) of the OLED was 8 lm/W. Furthermore, to improve the balance of charge carriers and enhance the eta(p) of the device, a doping system consisted of NPB hole transporting material and CBP host material with a concentration proportion of 1: 3 was employed as the mixed hole transporting layer. OLEDs with a structure of indium-tin oxide (ITO)/N, N'-bis-(1-naphthyl)-N, N'-biphenyl-1,1'-biphenyl-4,4'-diamine (NPB): CBP(1: 3)/CBP:(t-bt) 2Ir(acac)/2, 9-dimethyl-4, 7-diphenyl-phenanthroline (BCP)/Mg:Ag were fabricated. The results showed that current density was decreased and the maximum eta(p) of the device was 10.6 lm/W. Compared with the conventional device with NPB as hole transporting layer, the improved maximum eta(p) of the device with mixed hole transporting layer was increased 32.5 %. This is attributed to the reduction of hole injection amount and transporting mobility by doping material CBP in hole transporting layer, which significant enhances charge carrier balance and electron-hole recombination probability.

Contrast and Efficiency Enhancement in Organic Light-Emitting Devices Utilizing High Absorption and High Charge Mobility Organic Layers.

Enhancing the contrast and power efficiency of organic light-emitting diodes using CuPc/TiOPc as an anti-reflection layer

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

High‐Efficiency, Solution‐Processed, Multilayer Phosphorescent Organic Light‐Emitting Diodes with a Copper Thiocyanate Hole‐Injection/Hole‐Transport Layer

A novel organic light-emitting diode by utilizing double hole injection layer

Investigation and Optimization of Each Organic Layer: A Simple but Effective Approach Towards Achieving High-Efficiency Hybrid White Organic Light-Emitting Diodes

An Efficient Blue Organic Light Emitting Structure

Simple and High Efficiency Phosphorescence Organic Light-Emitting Diodes with Codeposited Copper(I) Emitter

Efficient Nondoped Organic Light-Emitting Diodes with CuI Complex Emitter

Influence of Hole Injection Structures on Organic Electroluminescent Devices

Highly Efficient Top Emitting Organic Light-Emitting Diodes With Organic Outcoupling Enhancement Layers

Peformance Enhancement Of Organic Light-Emitting Diodes Based On Different Hole Transport Layers

P‐168: Investigation of High‐Efficiency Electrophosphorescent Organic Light‐emitting Diodes with Double‐Emission Layers

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Efficiency Improvement Of Yellow Organic Light-Emitting Devices By Using Mixed Hole Transporting Layer

Efficient White Organic Light-Emitting Diodes Based on Iridium Complex Sensitized Copper Complex

Enhancement In Brightness And Efficiency Of Organic Electroluminescent Device Using Novel N,N-Di(9-Ethylcarbaz-3-Yl)-3-Methylaniline As Hole Injecting And Transporting Material

High-Brightness, Broad-Spectrum White Organic Electroluminescent Device Obtained by Designing Light-Emitting Layers As Also Carrier Transport Layers

Efficient orange-red phosphorescent organic light-emitting diodes using an in situ synthesized copper(I) complex as the emitter

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer