Abstract:The interfacial bonding between carbon fibers and the resin matrix affects the mechanical properties of carbon fibers, and the increase of modulus brings a challenge to the interfacial properties of carbon fibers. The traditional anodic oxidation with ammonium bicarbonate as an electrolyte has a limited effect on the surface treatment for high-modulus carbon fibers. In this paper, anodic oxidation with an acidic electrolyte is used to treat high-modulus carbon fibers. The influence mechanism of a graphitized structure on the anodizing reaction of the carbon fiber surface was studied. Raman spectroscopy, XPS, scanning electron microscopy, dynamic contact angle, and micro-debonding were used to characterize the effect of surface treatment and its influence on interfacial properties. The results show that with a certain concentration of sulfuric acid as an electrolyte, the oxidation of the carbon fiber surface with high modulus occurs more on the graphite boundary defects. Carbonylation occurs mainly in carbon fibers with high modulus. The surface of the carbon fiber with a relatively low modulus is mainly hydroxylated and carboxylated. The surface energy and interfacial properties of high-modulus carbon fibers were improved effectively by anodic oxidation with sulfuric acid as an electrolyte. Under the condition that the mechanical properties of carbon fibers are not decreased, the surface energy of high-modulus carbon fibers with 352 GPa increases from 36.17 to 45.41 mN/m, and the interfacial shear strength (IFSS) with the epoxy resin increases by 80.8% from 34.9 to 63.1 MPa. When the fiber modulus is 455 GPa, the surface energy of the carbon fiber increases from 32.32 to 43.73 mN/m, and IFSS increases by 253.4% from 11.8 to 41.7 MPa.

Surface Oxidation of Carbon Fiber and Its Influence on the Properties of Carbon Fiber Reinforced Bn-Si3n4 Composites

Effects of carbon fibers modification on the properties of unsaturated polyester self-healing composites

Effect of Surface Treatment of Carbon Fiber on the Mechanical Properties of C-f/SiO2 Composite

Oxidation Kinetics and Its Impact on the Strength of Carbon Short Fiber Reinforced C/SiC Ceramics

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

The effects of carbon fiber surface treatment by oxidation process for enhanced mechanical properties of carbon fiber/epoxy composites for biomedical application

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Oxidation Behavior of Carbon Fibers in Ceramizable Phenolic Resin Matrix Composites at Elevated Temperatures

Surface modification of carbon fibers by anodic oxidation

Influence of carbon fiber failure mode caused by TiO 2 coating on the high temperature tensile strength of carbon fiber reinforced 7075 Al alloy composites

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Oxidation behaviors of carbon fiber reinforced multilayer SiC-Si3N4 matrix composites

Insight into the origin of oxidation behaviors of carbon fiber reinforced carbon aerogel composites with different porous skeletons

The research on oxidation resistance ability and mechanical properties of carbon fiber reinforced phenolic resin composites

Sublimation and oxidation zone ablation behavior of carbon/carbon composites

Effect of Carbon Fiber Surface Modification on the Mechanical Properties of Carbon-Fiber-Reinforced Ultrahigh-Molecular-Weight Polyethylene Composite

Construction of Polar Functional Groups on the Surface of a High-Modulus Carbon Fiber and Its Effect on the Interfacial Properties of Composites

Effects of pyrolysis temperatures on the oxidation behavior of PIP-processed SiCf/SiC composites

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

A Study on the Surface Oxidation Pretreatment and Nickel Plating Mechanism of Carbon Fiber