Precipitation of Cu Particles During Low Temperature Aging in an Fe-1.5 Mass%Cu Alloy

T Yamashita,N Sano,Z Chi,M Enomoto,Y Shirai
DOI: https://doi.org/10.2320/jinstmet.68.1020
2004-01-01
Journal of the Japan Institute of Metals
Abstract:The effects of prestraining on the Cu precipitation and hardening were studied in an Fe-1.5 mass% Cu alloy. The specimens showed considerable precipitation hardening only at temperatures higher than 500degreesC without prestraining, while the 10% prestrained specimens exhibited an appreciable amount of hardening at temperatures as low as 300degreesC. To investigate the mechanism for hardening due to prestraining, the precipitation of Cu particles in bcc Fe matrix is simulated using Langer-Schwartz theory (modified by Kampmann and Wagner). The Cahn-Hilliard non-classical theory was employed to calculate the nucleation activation energy of nucleation of bee Cu particles or nano-clusters. The influence of excess vacancies and dislocations introduced during prestraining on the Cu precipitation was considered, and simulated results were compared with experimental observation by 3D-APFIM and TEM. The increase in hardness above 500degreesC with and without prestraining may be attributed to the Cu precipitation in the matrix. A small, but significant amount of increase in hardness of prestrained specimens aged at a temperature as low as 300degreesC is likely to be due to Cu precipitation on dislocations. It is also possible that excess vacancies accelerate the diffusion and thus, the kinetics of Cu precipitation both in the matrix and at dislocations.
What problem does this paper attempt to address?